Submerged up to 3 m
90°
60°
30°
0°
Hight Temperature 80°C
Hight Pressure 80/100 bar
10-15
cm
3m
Scale 1:1
IP68 and permanent submersion
Rubber 3D PROtection is certified with a grade of IP68, therefore it lends itself well
to permanent installations, submerged up to 3 metres, in environments such as
pools, fountains, vertical waterfalls, modern showers and similar, at the same time
guaranteeing maximum flexibility. In addition, the waterproof power cable allows
protection from the water. An amazing 5 metres long, much longer than the average
if we consider similar products already available on the market, the cable allows
placement of the power supply unit in a separate site, helping the installer and
facilitating subsequent maintenance and/or any replacements.
IP69 is a classification of the German DIN
40050-9 standard that extends the standard
IP classification, developed for sectors
where supplementary protection against
high pressures and high temperatures is
needed. Rubber 3D PROtection has passed
the IP69 test: once installed in a pool or
other environments that require periodic
cleaning through the use of a pressure
washer, Rubber PROtection withstands
jets of high-pressure or hot water aimed
directly on the product, without needing to
be removed and subsequently repositioned.
This is a considerable advantage that lets
you avoid maintenance operations which
would otherwise be compulsory and need to
be repeated over time. IP69 is an additional
classification that comes alongside the
IP68 standard set forth by the IEC60529
system. Rubber 3D PROtection is certified
for both grades of protection.
899
