Lea Ceramiche
Technical Info
Technical Info
CARATTERISTICHE TECNICHE: GRES PORCELLANATO
TECHNICAL FEATURES PORCELAIN STONEWARE / CARACTÉRISTIQUES TECHNIQUES DU GRÈS
CÉRAME / TECHNISCHE EIGENSCHAFTEN DES GRES FEINSTEINZEUGS
CONFORME - ACCORDING TO - CONFORME - GEMÄß: ISO 13006 G - EN 14411 G
LEA
CARATTERISTICHE TECNICHE
TECHNICAL FEATURES
CARACTÉRISTIQUES TECHNIQUES
TECHNISCHE EIGENSCHAFTEN
metodo di prova
test method
méthode d’essai
prüfmethode
requisiti prescritti
required values
valuer requise
vorgeschriebener wert
ISO 13006 - G / EN 14411 - G
gruppo / group BIa
valori medi
average values
valeurs moyennes
durchschnittliche werte
UGL: non smaltato
UGL: unglazed
UGL: levigato - lappato
UGL: polished - lappato
assorbimento d’acqua
water absorption
absorption d’eau
wasserabsorption
ISO 10545-3
≤ 0,5%
0,05%
sforzo di rottura (S)
breaking strength (S)
résistance à la rupture (S)
bruchlast (S)
ISO 10545-4
≥ 1300 N
conforme
compliant
conforme
gemäß
13600 N (20mm)
L2
resistenza alla flessione
modulus of rupture
résistance à la flexion
beigefestigkeit
ISO 10545-4
≥ 35 N/mm2
50 N/mm2
classe requisiti meccanici
mechanical classification
klasse mechanisches erfordernis
résistance mécanique
EN 1339
requisito non previsto
no provision
non prévu
nicht erforderlich
U14 (20mm)**
L2
resistenza all’abrasione
profonda
résistance to deep abrasion
resistance à l’abrasion profonde
widerstand gegen tiefenabrier
ISO 10545-6
≤ 175 mm3
145 mm3
Conforme
Compliant (LUX)
dilatazione termica
lineare
linear thermal expansion
dilation thermique linéaire
thermische dilatation
ISO 10545-8
requisito non previsto
no provision
non prévu
nicht erforderlich
a≤7x10-6 °C-1
resistenza alle
macchie
stain resistance
résistance aux taches
fleckenbeständigkeit
ISO 10545-14
classe 3 min
5 (resistente)
(resistant)
(résistant)
(beständing)
resistenza attacco
chimico*
chemical resistance
résistance chimique
chemischee beständigkeit
ISO 10545-13
come indicato dal
produttore
as indicated by manufacturer
comme indiqué par le producteur
wie wom hersteller angegeben
LA - HA (resistente)
(resistant)
(résistant)
(beständing)
resistenza al gelo
frost resistance
résistance au gel
frostbeständigkeit
ISO 10545-12
nessuna alterazione
no alterations
aucune altération
keine änderung
resistente
resistant
résistant
beständing
reazione al fuoco
fire reaction
réaction au feu
Brandverhalten
EN 13823
EN 9239-1
CPR (UE) 305/2011
2000/147/CE
UNI EN 13501-1
Classe / Class A1
(wall)
Classe / Class A1fl
(floor)
conducibilità termica
thermal conductivity
conductivité thermique
Wärmeleitfähigkeit
EN 12524
-
λ = 1,3 W/m° k /
0.7 BTU/ft h° F
caratteristiche
dimensionali
dimensions
caracteristiques
dimensionnelles
scitenmasse
lunghezza
e larghezza
length and width
longueur et largeur
länge und breite
ISO 10545-2
± 0,6% max ± 2mm
Non rett / Not rect
conforme
compliant
conforme
gemäß
± 0,3% max ± 1mm
Rett / Rect
rettilineità
spigoli
straightness of sides
rectitude des arêtes
kantengeradheit
ISO 10545-2
± 0,5% max ± 1,5mm
Non rett / Not rect
conforme
compliant
conforme
gemäß
± 0,3% max ± 0,8mm
Rett / Rect
ortogonalità
rectangularity
orthogonalité
rechtwinkligkeit
ISO 10545-2
± 0,5% max ± 2mm
Non rett / Not rect
conforme
compliant
conforme
gemäß
± 0,3% max ± 1,5mm
Rett / Rect
planarità
flatness
planéité
ebenflächigkeit
ISO 10545-2
± 0,5% max ± 2mm
Non rett / Not rect
conforme
compliant
conforme
gemäß
± 0,4% max ± 1,8mm
Rett / Rect
spessore
thickness
epaisseur
stärke
ISO 10545-2
± 5% max ± 0,5mm
conforme
compliant
conforme
gemäß
* ad esclusione dell’acido fluoridrico e suoi derivati / excluding hydrofluoric acid and its derivatives
sauf l’acide fluorhydrique et ses derivés / ausgenommen den fluorwasserstoff und seine derivate
**carrabile quando incollata su massetto. La classificazione si riferisce al solo formato quadrato, fino a 60x60 cm / can be
driven on when glued on screed. The classification only refers to the square format, up to 60x60 cm / carrossable s'il est collé
sur une chape. La classification ne concerne que le format carré, jusqu'à 60x60 cm / befahrbar bei Verkleben auf Estrich. Die
Klassifikation bezieht sich nur auf das quadratische Format, bis zu 60x60 cm
TECHNICAL CHARACTERISTICS: PORCELAIN STONEWARE.
(AMERICAN STANDARDS)
ACCORDING TO ANSI A 137.1 UNGLAZED PORCELAIN TILES (CLASS P1)
LEA
LEA
TECHNICAL FEATURES
test method
required values
ANSI A 137.1
average values
UGL: unglazed
average values
UGL: polished
lappato
water absorption
ASTM C373
≤ 0.5%
0.05%
0.05%
breaking strength
ASTM C648
≥ 250 lbf
compliant
2800 lbf (20mm)
L2
compliant
deep abrasion
resistance
ASTM C1243
≤ 175 mm3
145 mm3
145 mm3
Conforme
Compliant (lux)
linear thermal
expansion
ASTM C372
no provision
a≤4.4x10-6 °F-1
a≤8x10-6 °C-1
a≤4.4x10-6 °F-1 a≤8x10-6 °C-1
stain resistance
ASTM C1378
as indicated
by manufacturer
A resistant
A resistant
chemical
resistance*
ASTM C650
as indicated
by manufacturer
A resistant
A resistant
frost resistance
ASTM C1026
as indicated
by manufacturer
resistant
resistant
flame spread
ASTM E84
-
Class A
Class A
dimensions
edge warpage
ASTM C485
rectified
± 0.4% or max ± 0.05
inch** or ± 1.8 mm***
calibrated
± 0.5%
or max ± 0.07
inch
compliant
compliant
diagonal
warpage
ASTM C485
rectified
± 0.40%
or max ± 0.07 inch
calibrated
± 0.50%
or max ± 0.07
inch
compliant
compliant
nominal
dimensions
ASTM C499
rectified
- 3.0% / + 2.0%
of nominal
dimensions
calibrated
± 3.0%
of nominal
dimensions
± 1.5%
± 1.5%
calber range
ASTM C499
rectified
± 0.25%
or max ± 0.03 inch
calibrated
± 0.50%
or max ± 0.08
inch
compliant
compliant
thickness
ASTM C499
≤ 0.040 inch
≤ 0.040 inch
≤ 0.030 inch
≤ 0.030 inch
wedging
ASTM C502
rectified
± 0.25%
or max ± 0.03 inch
calibrated
± 0.50%
or max + 0.08
inch
compliant
compliant
*
excluding hydrofluoric acid and its derivatives
** wichever is less, for tiles up to 24" (610 mm) on any side
*** applies to tiles larger than 24" (610 mm) on any side
Lea Ceramiche
280
281
