L&L Luce&Light
917
N PE
230V
Vout
+ -
-
-
+
-
-
+
SWITCHING
SUPPLY
PUSH
ARC336***D1
VINVIN BTNBTN
L
OPERATION:
Push button
Function
Click
On/Off
A long press (>1sec) when switched off
Change in rotation speed*
A long press (>1sec) when switched on
Start/Stop colour rotation
* The colour rotation speed can be adjusted to 4 levels.
The selected speed is displayed with a white flashing light:
- 10 flashes/sec for a 6-second rotation
- 5 flashes/sec for a 30-second rotation
- 2 flashes/sec for a 6-minute rotation
- 1 flash/sec for a 30-minute rotation
This system can be used with a remote control (see TLR07, TLC15, TLC16, TLC17 on page 921).
Easy RGB Push is an RGB sequencer with three output channels that enables you to control LED RGB devices in current or voltage to
dynamically change their colour. The device allows you to adjust the colour tone and rotation speed of the RGB cycle using a Normally Open (NO) button.
The optimized adjustment curve produces a soft colour fade, ensuring maximum visual comfort.
The supply voltage varies from 12Vdc to 48Vdc. The device is equipped with systems that protect it from:
• overtemperature;
• overpowering;
• underpowering;
• power supply polarity reversal;
• output short circuit.
It also has an output current limiter.
CODE
RGB power
min-max
INput
OUTput
Dimensions
IP
ARC336350D1
3–12.5W
3–25W
3–50W
12Vdc
24Vdc
48Vdc
350mA/3ch
25x44x44 mm
20 g
Ø52 mm
IP20
ARC336500D1
3–18W
3–36W
3–72W
12Vdc
24Vdc
48Vdc
500mA/3ch
25x44x44 mm
20 g
Ø52 mm
IP20
ARC336700D1
3–25W
3–50W
3–100W
12Vdc
24Vdc
48Vdc
700mA/3ch
25x44x44 mm
20 g
Ø52 mm
IP20
ARV230PD1
12Vdc
24Vdc
48Vdc
1–90W
1–180W
1–360W
25x44x44 mm
20 g
Ø52 mm
IP20
POWER SUPPLY UNITS AND CONTROL GEAR
EASY RGB MULTICHANNEL SEQUENCER
LOW-VOLTAGE SEQUENCERS
Low-voltage sequencers are a solution for controlling multicolour fixtures via different types of input:
• Normally Open (NO) button;
• 0/1–10V analogue signal;
• 0/1–10V potentiometer;
• DALI digital signal;
• DMX512 digital signal.
