L&L Luce&Light
844
PRI
SEC
CONSTANT
CURRENT
350mA
+
-
+
+
-
-
L
N
The electronic multi-current/multi-voltage power supply unit has DIP switches, a component inside the power supply that is used to set the output voltage/current.
This type of power supply unit is recommended for installations where you need to be able to adjust the system’s lighting level, so that it can be adapted to
the different light conditions.
It is very versatile and can also be utilised as a generic PSU: this makes it ideal for different applications.
UNIVERSAL POWER SUPPLY UNITS THAT CAN BE SET FOR LEDS
Wiring diagram of a series connection
Should you need to use a constant-current power supply unit (series connection), you should consider:
• the number of power LEDs present in the lighting fixture requiring power;
• the maximum current that can be used to power them (350mA, 500mA, 700mA or 1050mA).
Check the maximum operating current admissible, then count the total number of power LEDs in each fixture and add them together (example: 2 fixtures with
3 LEDs each, total 6 LEDs). Based on this information, and taking into consideration any special operating needs (dimming), you will now be able to select a
suitable power supply unit from the ones given in the tables of 350/500/700/1050mA power supply units for LEDs, being careful to check that the maximum
number of LEDs it can manage matches your requirements.
Be sure to always check that the power supply unit’s electrical output specifications correspond to the fixture’s minimum requirements, to ensure a correct
operation.
WARNING:
Do not connect switches to the secondary circuit.
The system must be powered only after all the lighting fixtures have been connected.
CONNECTING IN SERIES
ON/OFF CONSTANT-CURRENT PSU
CODE
LEDs
INput
OUTput
Dimensions
IP
A19220TC
1–11
90–264Vac
50–60Hz
60–360mA
19x34x115 mm
65 g
Ø40 mm
IP20
ACUNI032T1
1–12
198–264Vac
50–60Hz
350–700mA
12-24-48Vdc
34x46x166 mm
185 g
Ø56 mm
IP20
ACUNI020T1
1–15 350mA
1–10 500mA
1–7 700mA
220–240Vac
50–60Hz
350mA
500mA
700mA
110x52x22 mm
185 g
Ø55 mm
IP20
ACUNIC30T1
220–240Vac
50–60Hz
350mA
500mA
700mA
180x30x21 mm
110 g
Ø38 mm
IP20
ACUNI039T1
220–240Vac
50–60Hz
350mA
500mA
750mA
1050mA
42Vdc max
90x67x21 mm
Ø72 mm
IP20
ACUNI042T1
1—12
220—240Vac
50—60Hz
300—1050mA
30x43x147 mm
122g
Ø54 mm
IP20
Cat_2020_Alimentatori_Elettronica_Controllo.indd 844
Cat_2020_Alimentatori_Elettronica_Controllo.indd 844
31/07/20 15:01
