TECHNICAL SPECIFICATIONS
HITO
DESKS, MEETING TABLES and CONFERENCE TABLES as follows:
LEGS
Consisting of an internal load-bearing structure in press formed steel. To obtain the aesthetic design, the steel framework is inserted into a special
mould and foamed using BayDur60 structural polyurethane with a density of 650 gr/dm3.
Available in three different lacquered finishes:
1.
MATT lacquering with a water-based paint, in White RAL9016, Black RAL9005, Beige LUXOR, Yellow EVORA, Red NAMIB and Green COMODORO
finishes.
2.
METAL lacquering with a water-based paint, in PEWTER, OLIVE BROWN and BRONZE finishes.
The legs can be FIXED or HEIGHT-ADJUSTABLE (see features of Electrical Adjustment system). They are fitted with 10mm adjustable levellers so they
sit perfectly level on the floor.
TOPS
Made from 30 mm-thick MDF with a density of about 800 Kg/m3, available in two different finishes:
1.
VENEERED on the top in one of the two wood variants - black WALNUT or EUCALYPTUS. Lacquered on the underside in a finish to match the
legs, using water-based paint. A thick wood trim with rounded edges is applied all around the border. The wood part is coated with a transparent,
water-based matt paint for protection.
2.
LACQUERED (using water-based paints) on the top and underside in a finish to match the legs, available with the MATT variant in WHITE or
BLACK, or the METAL variant in BRONZE, PEWTER or OLIVE BROWN.
3.
FENIX in Beige LUXOR, Yellow EVORA, Red NAMIB, Green COMODORO and BLACK finishes.
The panels have high bending and tensile strength, and excellent resistance to ageing and stains. The standard panels used are classified for reaction
to fire Class 2.
FRAMEWORK
The framework - available only in the Polyester Matt Black RAL9005 finish - consists of:
•
two longitudinal steel tubes (100x50x2 mm) shaped using laser tube technology
•
two steel crosspieces (45x25x2 mm)
•
a central receptacle made from press formed steel (450x400xH.75 mm) to store the whole cabling and control box system in the version with
electrical adjustment.
SPECIFICATIONS OF ELECTRICAL ADJUSTMENT SYSTEM
System consisting of four, two-stage rectangular columns (90x60 mm), complete with impact sensor to minimise the risk of damage to the table when
rising and/or descending. Synchronised movement of columns. Invisible inner sliding bearings for smooth, silent movement.
Control box with electronic overload protection and soft start-stop function, stand-by power consumption (0.1 W), interchangeable power cable,
low-profile design (only 35 mm high). A sliding control pad is positioned on the right part of the top.
ROUND TABLES for connections as follows:
LEG
Consisting of a central structure made from a 200xD.3 mm tube processed using laser tube technology, a bottom base made from steel (390xD.8 mm)
and a crosspiece (80x40xD.2 mm) connecting it to the desk.
Available in three different coated finishes:
1.
MATT lacquering with a Polyester coating, in White RAL9016, Black RAL9005, Beige LUXOR, Yellow EVORA, Red NAMIB and Green COMODORO
finishes.
2.
METAL lacquering with a Polyester coating, in PEWTER, OLIVE BROWN and BRONZE finishes.
The leg can be FIXED or HEIGHT-ADJUSTABLE (see features of Electrical Adjustment system).
Felt pads (2.7mm thick) made from POLIT-R are applied to the bottom of the base that sits on the floor.
TOPS
Made from 30 mm-thick MDF with a density of about 800 Kg/m3, available in two different finishes:
1.
VENEERED on the top in one of the two wood variants - black WALNUT or EUCALYPTUS. Lacquered on the underside in a finish to match the
legs, using water-based paint. A thick wood edge with rounded corners is applied all around the border. The wood part is coated with a transparent,
water-based matt paint for protection.
2.
LACQUERED (using water-based paints) on the top and underside in a finish to match the legs, available with the MATT variant in WHITE or
BLACK, or the METAL variant in BRONZE, PEWTER or OLIVE BROWN.
3.
FENIX in Beige LUXOR, Yellow EVORA, Red NAMIB, Green COMODORO and Nero INGO finishes.
The panels have high bending and tensile strength, and excellent resistance to ageing and stains. The standard panels used are classified for reaction
to fire Class 2.
UPPER SUPPORT TRAY
The upper support TRAY consists of a central receptacle made from press formed steel and a plate (both 2 mm-thick steel) to store the whole cabling
and control box system in the version with electrical adjustment or the multipurpose cabled module in the fixed version.
The basket tray is available only in the Polyester coated Matt Black RAL9005 finish.
SPECIFICATIONS OF ELECTRICAL ADJUSTMENT SYSTEM
System consisting of two, two-stage rectangular columns (90x60 mm), complete with impact sensor to minimise the risk of damage to the table when
rising and/or descending. Synchronised movement of columns. Invisible inner sliding bearings for smooth, silent movement.
Control box with electronic overload protection and soft start-stop function, stand-by power consumption (0.1 W), interchangeable power cable,
low-profile design (only 35 mm high). A sliding control pad is positioned on the right part of the top.
56
57
