D E S I G N E R · H E N R I K P E D E R S E N · D E N M A R K
1 4 7
T M
Meteor colour, powder coated aluminium frame. 50mm thick raw teak
table top. Natural or buffed teak finish. Sap wood or contour cut edge
profile.Without parasol hole. Protective cover included. Seats 10.
Weight : 109kg · Assembly : Required · Qty. Per Carton : 1
ITEM NUMBERS
101742 : Buffed Teak Finish / Contour Cut Edge
101743 : Buffed Teak Finish / Sap Wood Edge
101750 : Natural Teak Finish / Contour Cut Edge
101751 : Natural Teak Finish / Sap Wood Edge
NOTES
Width of tables can vary from 94cm - 104cm. Tables with sap wood
edge profile should only be used indoors or in a well protected area.
A selection of RAW Dining Tables that are available from stock can be
viewed and reserved for purchase on our website page below...
www.gloster.com/en/reservations
2 8 0 c m D I N I N G TA B L E
W · 94 - 104 L · 280 H · 74
Meteor colour, powder coated aluminium frame. 50mm thick raw teak
table top. Natural or buffed teak finish. Sap wood or contour cut edge
profile.Without parasol hole. Protective cover included. Seats 12.
Weight : 136.5kg · Assembly : Required · Qty. Per Carton : 1
ITEM NUMBERS
101744 : Buffed Teak Finish / Contour Cut Edge
101745 : Buffed Teak Finish / Sap Wood Edge
101752 : Natural Teak Finish / Contour Cut Edge
101753 : Natural Teak Finish / Sap Wood Edge
NOTES
Width of tables can vary from 94cm - 104cm. Tables with sap wood
edge profile should only be used indoors or in a well protected area.
A selection of RAW Dining Tables that are available from stock can be
viewed and reserved for purchase on our website page below...
www.gloster.com/en/reservations
3 5 0 c m D I N I N G TA B L E
W · 94 - 104 L · 350 H · 74
SAP WOOD
EDGE
E D G E P R O F I L E S
CONTOUR
CUT EDGE
F R A M E C O L O U R
METEOR
T E A K F I N I S H E S
NATURAL
FINISH TEAK
BUFFED
FINISH TEAK
N O T E S
RAW Sapwood Edge tables retain the natural edge of the board.
During the life cycle of the tree, the sapwood will often be attacked
by wood boring insects. The kiln drying process rids the timber of any
insects. The small holes in the face of the sap, and burrows on the
surface of the sap are all part of the natural character of the timber.
From time to time, the checks and splits that are a natural feature of the
RAW planks are required to be re-enforced to prevent them extending
too far into the wood. For this purpose, we have designed a brass, X
shape, butterfly insert that stabilises the split in a fashion befitting of the
teak raw material to which it is combined. As a result, RAW tables may
or may not have these X shape, brass butterflies inserted.
