Full surface induction cooktop
400 series
C X 492
C X 492 111
Black glass ceramic.
Stainless steel frame.
Width 90 cm.
Included in the price
1 wireless cooking sensor for
temperature regulation.
Installation accessories
V A 420 004
Connection strip for combination with
other Vario appliances of the
400 series for flush mounting.
V A 420 010
Connection strip for combination with
other Vario appliances of the
400 series for surface mounting.
Special accessories
C A 060 300
Cooking sensor for temperature
regulation within pots.
G N 232 110
Teppan Yaki plate made of multi ply
material, GN 1/1.
For full surface induction cooktops.
Highlights
— One single big cooking surface.
— Free positioning of cookware.
— All sizes and formats of cookware
can be used.
— TFT touch display for an intuitive
control of all functions.
— Cooking sensor function for
temperature control in pots.
— Professional cooking functions.
— Max. power output for big
cookware of up to 5.5 kW.
— Precision crafted 3 mm stainless steel.
— For surface mounting with a visible
edge or for flush mounting.
— Can be combined perfectly with
other Vario appliances of the
400 series.
Cooking zones
One unique cooking surface of
3200 cm².
Up to 6 items of cookware can be
placed simultaneously on the cooktop.
Handling
Easy to use colour graphic TFT touch
display with use indications.
Electronic power control in 17 output
levels.
Features
Cooking sensor function.
Professional cooking function.
Dynamic cooking function.
Teppan Yaki function.
Booster function for pots.
Booster function for pans.
Keep warm function.
Individual pot detection.
Cooking timer for each cooking
position.
Stopwatch.
Short-term timer.
Information key with use indicators.
Power management.
Selected digital services
(Home Connect)
Cooktop-based ventilation control
(with suitable hood).
Remote monitoring.
Remote diagnostics.
Please read additional information on
Home Connect on page 409.
Safety
Main switch.
Residual heat indication.
Child lock.
Safety shut-off.
Pause function.
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted),
the specific definition of the cut-out
must be observed.
If combining several Vario appliances
of the 400 series, select combinations
with or without appliance cover, and a
connection strip VA 420 must be
placed between the appliances.
Depending on the type of installation,
the corresponding connection strip
must be provided.
The bearing capacity and stability, in
the case of thinner worktops in
particular, must be supported using
suitable substructures. Take into
account the appliance weight and
additional loads.
Additional instructions for flush
mounting:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the worktop
manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
Please read additional planning notes
on page 132 and 134.
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
The wok pan WP 400 001 cannot be
used with this appliance.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 31 kg.
Please read the installation details
regarding air ducting on page 212.
Connection
Total connected load 7.4 kW.
Connecting cable 1.5 m without plug.
Power consumption standby/
display off 0.5 W.
Power consumption standby/
network 2.0 W.
Please check the user manual for how
to switch off the WiFi module.
Vario cooktops
96
