Gas cooktop 400 series
C G 492
C G 492 111F
Stainless steel.
Width 100.2 cm.
Liquid gas 28–37 mbar.
Wok burner with up to 5.8 kW.
C G 492 211
Stainless steel.
Width 100.2 cm.
Natural gas 20 mbar.
Wok burner with up to 6 kW.
Included in the price
1 wok attachment ring.
Necessary installation accessories
C A 429 410
Frame set including decorative frame
(to be welded in stainless steel
worktop) and holding frame.
Special accessories
W P 400 001
Wok pan made of multiple-layer
material.
With round bottom and handle,
ø 36 cm, 6 litres, height 10 cm.
Highlights
— Five multi-ring burners, up to 18 kW.
— Full electronic power level
regulation on 12 levels.
— Precise and reproducible flame size.
— Automatic fast ignition, electronic
flame monitoring with automatic
re-ignition.
— Simmer function for cooking on a
very low output level.
— Solid smooth-surface cast iron pan
supports on the same level as the
worktop.
— Solid stainless steel control knob.
Cooking zones
CG492111F
1 multi-ring wok burner
(300 W–5800 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(165 W–4000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(165 W–2000 W), suitable for pots up
to max. ø 24 cm.
CG492211
1 multi-ring wok burner
(300 W–6000 W), suitable for pots up
to max. ø 32 cm.
2 two-ring high output burners
(165 W–4000 W), suitable for pots up
to max. ø 28 cm.
2 two-ring standard burners
(165 W–2000 W), suitable for pots up
to max. ø 24 cm.
Handling
Control knobs with illuminated ring,
cooking zone and output level
markings.
One-handed operation.
Full electronic control in 12 output
levels for exact power level regulation
plus simmer function.
Automatic fast ignition.
Features
Simmer function.
Three-part cast iron pan support with
flat, continuous pot surface, on the
same level as the worktop.
Brass burner rings.
Safety
Electronic flame monitoring with
automatic re-ignition.
Residual heat indication.
Safety shut-off.
Planning notes
The frame set (necessary installation
accessory) can be sent in advance to
the manufacturer of the stainless
steel or granite worktop for fitting.
Special nozzles can be ordered as
spare parts.
Plan for an electrical connection (the
appliance is not operable without
power supply).
The horizontal positioning of the
knobs may be aligned with the
specific burners.
The drawing "Installation of the
control knob" must be observed if the
panel is more than 23 mm thick (there
must be a recess at the rear).
Minimum worktop depth 70 cm.
Air intake from above.
No intermediate shelf required.
Due to the separate frame welded
into the worktop, all parts remain fully
accessible.
Rear panel and wall trims must be
heat-resistant and consist of a
non-flammable material.
The appliance can be fixed from
above.
A minimum lateral clearance of at
least 300 mm from adjacent
heat-sensitive furniture or contact
surfaces must be observed or thermal
insulation fitted.
With a total connected load of more
than 11 kW local regulations
concerning room ventilation, room
size and combination of extraction or
recirculation hoods must be observed.
The minimum distance between the
cooktop surface and a cabinet above,
out of combustible material, needs to
be 76 cm.
The minimum distance to a ventilation
above is shown at the planning hints
for the individual ventilation product.
The combination with VL 414 is not
recommended, since the air
extraction from the centre burner
cannot be guaranteed due to the
distance.
Appliance weight: approx. 35 kg.
Connection
Total connected load gas 17.8/18.0 kW.
Total connected load electric
15.0/15.0 W.
Connecting cable 1.4 m with plug.
Cooktops
164
