C X 492 111
Black glass ceramic
Stainless steel frame
Width 90 cm
Included in the price
1 wireless plug-in core temperature
probe for cooktop
Installation accessories
V A 420 004
Connection strip for combination with
other Vario appliances of the
400 series for flush mounting
V A 420 010
Connection strip for combination with
other Vario appliances of the
400 series for surface mounting
Special accessories
C A 060 300
Cooking sensor for temperature
regulation within pots
G N 232 110
Teppan Yaki plate made of multi ply
material,
GN 1/1
For full surface induction cooktops.
G N 232 230
Teppan Yaki plate made of multi ply
material,
GN 2/3
For full surface induction cooktops.
Combinable with:
Ceiling ventilation 400 and 200 series
Table ventilation 400 series
Island- and wall-mounted hood 400 series
Flat kitchen hood 200 series
Canopy extractor 200 series
Good to know:
the hood has to be larger than the
cooktop(s) or it has to be as large as
the cooktop(s). Please check the
requirements in chapter ventilation.
Full surface induction cooktop
400 series
C X 492
–
One single big cooking surface
–
Free positioning of cookware
–
All sizes and formats of cookware
can be used
–
TFT touch display for an intuitive
control of all functions
–
Cooking sensor function for
temperature control in pots
–
Professional cooking functions
–
Max. power output for big cookware
of up to 5.5 kW
–
Precision crafted 3 mm stainless
steel
–
For surface mounting with a visible
edge or for flush mounting
–
Can be combined perfectly with
other Vario appliances of the
400 series
Cooking zones
One unique cooking surface of
3200 cm².
Up to 6 items of cookware can be
placed simultaneously on the cooktop.
Handling
Easy to use colour graphic TFT touch
display with use indications.
Electronic power control in 17 output
levels.
Features
Cooking sensor function.
Professional cooking function.
Dynamic cooking function.
Teppan Yaki function.
Booster function for pots.
Booster function for pans.
Keep warm function.
Individual pot detection.
Cooking timer for each cooking
position.
Stopwatch.
Short-term timer.
Information key with use indicators.
Power management.
Cooktop-based ventilation control
(with suitable hood).
Home network integration for digital
services (Home Connect) wireless
via WiFi.
The use of the Home Connect
functionality depends on the Home
Connect services, which are not
available in every country. For further
information please check:
home-connect.com.
Please read additional information on
Home Connect on page 416.
Safety
Main switch.
Residual heat indication.
Child lock.
Safety shut-off.
Pause function.
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted),
the specific definition of the cut-out
must be observed.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type of
installation, the corresponding
connection strip must be provided.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush mounting:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the worktop manufacturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
Please read additional planning notes
on page 132 – 136.
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
The wok pan WP 400 001 cannot be
used with this appliance.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 31 kg.
Please read the installation details
regarding air ducting on page 204.
Connection
Total connected load 7.4 kW.
Connecting cable 1.5 m without plug.
