A bulb-shaped lighting unit made of blown borosilicate glass, with good shock
resistance properties and excellent transparency, due to the reduced thickness of the
material. The led fi lament is held in position by a molybdenum structure incorporated
in a thin tube, also made of borosilicate, which is used in turn to extract the air and
therefore prevent any internal condensation build-up. The fi laments which convey the
power are housed in a dedicated cable gland designed to satisfy the safety regulations
and standards. The light source consists of a 225 mm long fl exible micro-led fi lament,
using customised electronics which can handle a light fl ow of 210 - 450 lumen, using
the most common Triac dimmers. The light temperature of 2200°K was selected to
replicate that of the traditional incandescent lamp. The same applies to the high CRI
(95), which guarantees a high quality standard of chromatic performance. The two
appliances are installed in the ceiling using a polycarbonate rose from which the power
cables run. Customised installations can also be created with the two nylon wires which
hold the appliances to the two supports to be fi xed to the ceiling. The light source is
guaranteed for 15,000 hours, with a fl ow loss of less than 20% in the course of time.
2019
Luminous fl ux in proportion to the voltage, for each lighting fi xture:
Volt 220 – 6W – CRI 95 – 2200K – 210lm.
Volt 230 – 6W – CRI 95 – 2200K – 360lm.
Volt 240 – 6W – CRI 95 – 2200K – 450lm.
Ø200
max Mt 2
max 78,74”
max Mt1
max 39,37’’
max Mt1
max 39,37’’
