473
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
Epsilon
EPSILON
65
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
Protection against
impact.
IK 05 - 0,70 joule
Wall fitting
Remote device required.
Pre-wired with approx
250mm of cable
• Luminaire for installation on wall – surface mounted.
• Configuration: turned aluminium body (EN AW6060 alloy)
and AISI 316L stainless steel fixing bracket. Glass diffuser:
extra clear with silkscreen border, fixed to the body by a
double-sided tape.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders that are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components that have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: III
• Installation: the luminaire is supplied with a piece of cable
(approx. 250mm) for an easy-to-make connection and it is
equipped with a dc/dc resin-coated converter that removes
electromagnetic interference. The luminaire is protected
against polarity reversal and sudden voltage peak. Parallel
wiring required.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.