377
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
Hyperion
HYPERION
65
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
• Rectangular luminaire for installation on wall – surface
mounted.
• Configuration: die-cast aluminium structure, EN AB-
47100 alloy (low copper content), stainless steel bracket
and transparent polycarbonate emitting unit. Optional
accessory: aluminium reflector (fixed by a double-sided
technical tape)
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders that are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components that have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN60598-1 standards
• Class of insulation: II; 24V version: III
• Installation: the luminaire is equipped with a piece of
neoprene cable (approx. 200mm) for an easy-to-make
connection. Direct screwing on surface through the
stainless steel bracket.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
Protection against
impact.
IK 09 - 10,00 joule
Wall fitting
Remote device required
for low voltage version
Pre-wired with approx
200mm of cable.
Bollard light
.12 Forest Green
