265
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
Spock
SPOCK
66
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
Floor installation
Ceiling fitting
Wall fitting
Protection against
impact
IK 07 -2,00 joule
Pre-wired with approx
1000mm of cable
• Adjustable projector for installation on ceiling, wall or floor.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content) and AISI 316L stainless steel
fixing bracket. Glass diffuser: extra clear with silkscreen
border, fixed through a robotic gluing system. The luminaire
has three connected parts: wiring unit (silicone gasket),
heat sink and emitting unit (silicone glue). A graduated
fixing plate allows a precise adjustment of the emitting
unit.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP66
• In compliance with EN60598-1 standards
• Class of insulation: I
• Installation: the luminaire is equipped with 1000mm of
cable for an easy-to-make connection.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
*AISI 316L stainless steel fixing bracket not painted.
.12 Forest Green