165
ALFIA
Alfia
54
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
METAL HALIDE VERSION:
Class A+
HIT-CE/G12
A+
FLUORESCENT VERSION:
Class A
TC-DEL/G24q-3
A
HALOGEN VERSION:
Class D
QT32/E27
D
HALOGEN VERSION:
Class D
QT14/G9
D
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
• Square luminaire for installation in the wall – recessed.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content). Glass diffuser: transparent or
sandblasted, fixed to the frame through a robotic gluing
system.
• Double layer coating for high resistance to corrosion: the
aluminium components are painted with a double coat
using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP54
• In compliance with EN 60598-1 standards
• Class of insulation: mains: I, LED module: II, III
• Installation: MiniAlfia is equipped with two cable holders
for three single wires. Alfia is equipped with two cable
holders for 5<ø<10mm cables. Outdoor use requires
suitable flexible cables assuring the watertightness of the
cable holders. Installation requires a dedicated box to be
ordered separately.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
Recessed wall fitting.
The fitting is
equipped with
2 cable input.
Remote device required
Protection against
impact.
IK 08 - 5,00 joule
HALOGEN VERSION:
Class D
QT32/E27
QT14/G9
METAL HALIDE VERSION:
Class A+
HIT-CE/G12
FLUORESCENT VERSION:
Class A
TC-DEL/G24d-3
.12 Forest Green
