38
PUSH BUTTON MECHANISMS
MÉCANISMES BOUTTON-POUSSOIR
MECCANISMI A PULSANTE
MECANISMOS PULSADORES
DRUCKTASTER MECHANISMEN
FD16516
10A 250V~
Push-button
Pousse-bouton
Pulsante
Pulsador
Drucktaster
FD16599
Push-button with temporized switch and diffuser. Timing 3 min. Max 500W incandescent 230V~
Bouton-poussoir avec interrupteur et diffuseur temporisé. Synchronisation 3 min.
Max 500Wà incandescence 230V~
Pulsante con interruttore temporalizzato e diffusore. Tempo minimo 3min.
Max 500W incandescente 230 V~
Pulsador con interruptor temporizador y difusor. Tiempo 3 min. Max 500W incandescente 230V~
Taster mit zeitlich einstellbaren Schalter und Diffusor 3 min. Max 500W Glühlampe 230V
FD-LD220
Dimmer for LED lamp
Power: 200W
230V 50/60 Hz
Installed in the mounting box
behind the push button.
Dimensions: 56 x 22 mm
Units: 1
FD-LD220WCM
LED dimmer with Bluetooth®
Power: 200W
230V 50/60 Hz
Installed in the mounting box
behind the push button.
Dimensions: 50 x 15.5 mm
Units: 1
LD200KRON
2 channel dimmer for LED lamp
Power: 2x100W
230V 50/60 Hz
Installed in the mounting box
behind the push button.
Dimensions: 57 x 21 mm
Units: 1
FD-LD440
Dimmer for LED lamp
Power: 440W
230V 50/60 Hz
Installed in the mounting box
behind the push button.
Dimensions: 56 x 22 mm
Units: 1
Dimmers for Push Buttons
FD-LD100, FD-LD220 and FD-LD440
Universal push dimmers FD-LD100, FD-LD220 and FD-LD440
Universal LED-dimmers for wallbox installation that starts at 1W
A common problem - when dimming LED lamps and CFL lamps - is that
conventional dimmers usually require a high minimum load of 50W, 35W
or 20W, while low energy light lamps and LED lamps have a power range
from 1W up to 20W. For dimming of these low energy lamps dimmers that
can operate from 1W and up are required. The series of universal push
dimmers starts already at 1W for dimming of both lowpower lamps as
well as electronic transformers, dimmable LED-drivers and incandescent
lamps.
Adjustable minimum dimming level
Depending on the type of load that is connected to the dimmer, the
dimmer’s lowest dimming level can be adjusted to fit the load in question.
The dimming characteristic is distinguished between different types of
loads. This feature is perfect for use when there is mixed loads of different
lamptypes including dimmable halogen and incandescent lights. It is
also very handy if the user at some future date decides to switch from
incandescent to 230 VAC dimmable LEDs. Then you need only adjust the
lowest dimming level to the new load, instead of buying a new dimmer.
Memory function
Equipped with memory function that also remains after power failure.
Dimmers for Push Buttons
