Description
The Ekinex® EK-DH4-TP motion sensors an infrared motion detector passive (PIR)
for outdoor ceiling or wall mounting, for motion and presence detection of people in
outdoor spaces with a 360° coverage area. The detection area can be extended using
other sensors configured as slave devices. One integrated light sensor, combined
with the motion detector, can manage the ignition of light according to brightness
level and presence. The device has two channels of separate output for lighting, with
independent parameters; the operation can be automatic or semi-automatic. All the
above listed parameters can be set by the user via ETS or via a dedicated IR remote
control during installation. The device has two additional HVAC channels, which act
similarly to brightness control channels, but without the standby time function and
light level dependency. One additional alarm channel can activate or deactivate
the load depending on the number of trigger events (movements) detected in a
configurable time interval.
Main features
• Semi-automatic or fully automatic operation
• Two independent light control channels
• Two independent HVAC control channels
• An alarm channel
• An additional device can be used as a slave for any of the channels
• Detection range of 360° (180° on the wall), sectors can be masked
through optic screens
• Adjustable sensitivity, with "Walk test" to verify the detection radius
• Parameters can be set by ETS or via an IR remote control.
Technical data
• Rated voltage: 24 VDC (21-30 VDC) supplied by KNX bus
• Current consumption (on KNX bus): max. 10 mA (operation) / 5 mA (standby)
• Sensing range: 360° circular (masking), up to 32 m diameter at 2.5 m
mounting height
• Light measuring range: 10..2000 Lux
• Housing, lens and frame in plastic material
• Safety standards: IEC 61000-6-1 / IEC 61000-6-3 / EN 55014 / EN 50491
• Environmental conditions
• Operating temperature: - 20 ... + 40°C
• Relative humidity: 95% not condensing
• Environmental protection: IP20
Switching, display and detection elements
The device is equipped with:
• on the rear side, a programming pushbutton
• visible through the plastic lens, a blue programming LED, a red signalling LED,
a PIR sensor, a brightness sensor and an IR receiver
Accessories
The following accessories are available to be ordered separately:
• IR Remote Controller - EK-QR6-IR
Motion sensor
for outdoor mounting
WALL-MOUNT DEVICES
Configuration and commissioning
By means of ETS5 software or later versions
Application program: APEKDH4TP##.knxprod
(## = version, download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
Order information
Code
Package
EK-DH4-TP
1 pcs.
80
90
150
84
79
Description
With the KNX Secure multifunctional presence sensor with microwave technology it
is possible to detect the actual presence of individuals in rooms. Due to its very high
sensitivity to micro movements, its ideal use is in hotel rooms, offices and any place
of sedentary presence.
Despite the multiple functionalities inside, the presence sensor comes in an ultra-
compact design that is almost invisible in environments.
Main features
• Detection of normal and small movements with 24GHz microwave technology
• Up to 4 output channels and up to 3 brightness levels for both the start and end situation
• Automatic and semi-automatic modes
• Built-in brightness sensor
• Built-in room temperature sensor
• Built-in air humidity sensor
• Constant brightness control
• Thermoregulation functions
• Advanced logic functions
• Master/slave working mode
• Configurable orientation light
• Support of the KNX data Secure protocol
Technical data
• 360° static presence detection range up to 8.5m diameter (at 4m height)
• Installation height approx. 2.5-4 m
• Power supply 21-30 Vdc via KNX bus and current consumption 4mA@30Vdc
• SELV auxiliary power supply 12-30 Vdc and current consumption 20mA@30Vdc
• Illumination measurement range 0-2000 lux
• Body diameter Ø 48.5 mm
• Outer diameter Ø 65 mm
• Mounting hole diameter Ø 53-55 mm
• Recess depth 38 mm
KNX Secure multifunctional
presence sensor
WALL-MOUNT DEVICES
Configuration and commissioning
By means of ETS5 software or later versions
Application program: APEKSG2TPP##.knxprod
(## = version, download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
Order information
Code
Package
EK-SG2-TP-P
1 pcs.
TECHNICAL024EN
144
145
03
Introduction
17
Wall-mount devices
247
DIN-Rail mount modules
315
Visualisation
331
Audio Multiroom
379
IP Door Phone
397
Lift TV
409
Tools
413
Sales kit
419
Technical section
429
General terms of sale
433
General index
