Cards programmer
WALL-MOUNT DEVICES
Description
The Ekinex® EK-TP2-TP card programmer with RFID technology is used for
programming cards to be used with the EK-TR2-TP card reader and the Ekinex EK-
TH2-TP card holder. Equipped with a bi-stable relay (4A@24Vac/dc) and an input for
potential-free contacts the device has an integrated KNX bus communication module
and is designed to be mounted in a flush-mounted wall box; it is supplied with SELV
voltage via the KNX bus and requires an auxiliary power supply at 12-24 Vac/dc.
Functionality
• Programming of cards via KNX TP bus (twisted pair) and Ekinex Accédo software
• Card programming with different user profiles: guest, staff and passe-partouts
• Guest booking management and check-in/check-out operation
• Card activation based on time slots for service personnel
• Event notification to the visualisation system with memory buffer
Main features
• Plastic casing
• Bus line connection via KNX terminal
• Recessed wall mounting on round box
• Degree of protection IP20 (installed)
• Weight 50 g (with mounting bracket)
Technical data
• 30 Vdc power supply via KNX bus
• Auxiliary power supply 12-24 Vac/dc
• Current consumption from the bus < 10 mA
Delivery
Delivery includes a terminal block for connection to the bus, two pairs of fixing screws.
Accessories
The following accessories are available to be ordered separately:
• Smart-card EK-TCE-10 (Ekinex logo in black, pack of 10 cards)
or EK-TCC-10 (personalised with customer logo, on request)
• square frame Form or Flank version
• square plate with 45 x 45 mm window
• a plastic adapter
Dimensions [mm]
43,3
44,8
44,8
Configuration and commissioning
Ekinex® Accédo software for programming access control functions and cards.
Project file: APEKTRTPTH2TP##.knxproj (downloadable from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Order information
Code
Mounting
Package
EK-TP2-TP
square plate with 45x45 mm window
1 pcs.
optional frame Form or Flank version
Description
The card programmer kit is a table-top control panel, coordinated with the
aesthetic lines of the Ekinex® wall-mounted products, to be installed at one or
more reception points in an accommodation facility, in combination with the
KNX standard products for controlled access to rooms and public areas EK-TR2-
TP and EK-TH2-TP and the Ekinex® Accédo EK-ACC-SW visualisation and card
programming software.
Functionality
The programmer kit, suitable for reception desks in hospitality facilities such as
hotels and reception centres, is equipped with an elegant frame in pre-painted
aluminium in bromine grey and performs the following functions:
• Programming smart-cards with RFID (Radio Frequency
• Identification) technology, 13,56 MHz frequency, Mifare Classic 1kB protocol
• Signaling via buzzer of the bathroom tie rod alarms
• Alarm silencing through manual button
Main features
• 1 KNX transponder card programmer cod. EK-TP2-TP
• 1 universal KNX interface EK-CC2-TP (2 IN / 2 OUT)
• 1 buzzer 12Vac, 5VA anthracite Colour
• 1 push button 1P NO, 10A at 250Vac anthracite Colour
The external power supply not included in the supply must be made with transformer
12Vac 1A. The card programmer and the universal interface with 2 inputs and 2
outputs must be connected to the KNX TP bus (twisted pair) by means of the red-
black terminal provided.
Other features
• card programming with RFID technology, 13,56 MHz frequency, Mifare
protocol, Classic 1 KB
• 4M table-top box, Colour grey, with plastic housing
• Degree of protection IP20 when installed (according to EN 60529)
• Insulation class II (according to EN 60335-1)
• Climatic classification 3K5 (indoor use, dry) and mechanical classification
3M2 (according to EN50491-2)
• Device weight: 250 g
• Dimensions 148,8 x 92 x 25,1 mm (W x H x D)
Environmental conditions
• Operating temperature: 0°C ... + 40°C
• Storage temperature: - 10 ... + 70°C
• Transport temperature: - 10 ... + 70°C
• Relative humidity: 95% non condensing
Dimensions [mm]
Desktop cards
programmer kit
WALL-MOUNT DEVICES
Configuration and commissioning
Ekinex® Accédo software for programming access control functions and cards.
Project file: APEKTRTPTH2TP##.knxproj (downloadable from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Order information
Code
Mounting
Package
EK-TPBOX-TP
plate with 45x45 mm windows
1 pcs.
148,8
25.1
12
92
TECHNICAL024EN
132
133
03
Introduction
17
Wall-mount devices
247
DIN-Rail mount modules
315
Visualisation
331
Audio Multiroom
379
IP Door Phone
397
Lift TV
409
Tools
413
Sales kit
419
Technical section
429
General terms of sale
433
General index
