Description
The Ekinex® presence sensor EK-DF2-TP is a ceiling flush mount Passive Infrared
(PIR) motion detector, for the detection of movement and presence of people in
indoor spaces with a coverage area of 360°. The detection area can be extended
using other sensors configured as slave devices. An integrated light sensor, combined
with the motion detector, can manage light switching depending on brightness level
as well as presence. The device has two distinct output channels for lighting, with
independent parameters; the operation can be automatic or semi automatic. The
device is also capable of maintaining a constant brightness level in the room by
controlling a dimmable light source. All of the above parameters can be set by the
user either through ETS or by means of a dedicated IR remote during installation.
The device has two additional HVAC channels, which act in a similar way as the
Light Control channels but without the standby time and light level dependence. An
additional alarm channel can switch the load on or off depending on the number of
trigger events (movements) detected in a time frame of configurable duration
Main features
• Semi-automatic or fully automatic operation
• Two independent Light control channels
• Two independent HVAC control channels
• One alarm channel
• An additional device can be used as slave for any of the channels
• Detection span of 360°, sectors can be masked through optical shields
• Adjustable Sensitivity, with “Walk test” to verify detection range
• Parameters can be set from ETS or through an IR remote
Technical data
• Rated voltage: 24 Vdc (21 - 30 Vdc) supplied by KNX bus
• Current consumption (on KNX bus): max 10 mA (operation) / 5 mA (Standby)
• Detection range: 360° circular (maskable), up to 9 m diameter at 2.5 m
mounting height
• Light measurement range: 10..2000 Lux
• Housing, lens and frame in plastic material
• Safety standards: IEC 61000-6-1 / IEC 61000-6-3 / EN55014 / EN 50491
Environmental conditions
• Operating temperature: - 20 ... + 40°C
• Relative humidity: 95% not condensing
• Environmental protection: IP20
Switching, display and detection elements
The device is equipped with:
• on the rear side, a programming pushbutton
• visible through the plastic lens, a blue programming LED, a red signalling LED,
a PIR sensor, a brightness sensor and an IR receiver
Accessories
The following accessories are available to be ordered separately:
• IR Remote Controller - EK-QR6-IR and support for protruding mounting - EK-QS3
Ceiling mounted
presence sensor
WALL-MOUNT DEVICES
Confi guration and commissioning
By means of ETS5 software or later versions
Application program: APEKDF2TP##.knxprod
(## = version, download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Dimensions [mm]
78
7
Ø 75
Ø 52
Order information
Code
Package
EK-DF2-TP
1 pcs.
EK-DF2-TP
EK-QR6-IR
Movement sensor
WALL-MOUNT DEVICES
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Confi guration and commissioning
By means of ETS5 software or later versions
Application program: APEKSN2TP##.knxprod
(## = version, download from www.ekinex.com)
Order information
Code
Lens colour
Package
EK-SN2-TP-GAA
white
1 pcs.
EK-SN2-TP-GAE
black
Description
The motion sensor Ekinex® EK-SN2-TP is used to detect the passage and standing
of persons in a semicircular detection area. It is ideally suited for use in corridors,
passage areas, toilets, stairwells, lift landings and generally environments with
occasional occupancy. The device has dedicated channels for controlling lighting,
HVAC equipment and alarms. Movement/presence detection is carried out by
PIR (passive infrared) sensors; a sensor also allows the measurement of ambient
brightness. The operating mode is semi-automatic or fully automatic. The device
has an integrated KNX bus communication module and is designed for mounting in
a flush-mounted wall box; it is powered via the KNX bus and does not require an
auxiliary power supply. does not require an auxiliary power supply.
Main features
• Semi-automatic or fully automatic operation
• Two independent light control channels
• Two independent HVAC control channels
• One alarm channel
• An additional device can be used as a slave for any of the channels
• 200° detection range
• Adjustable sensitivity (4 levels)
Technical data
• Rated voltage: 21-30 VDC supplied by KNX bus
• Current consumption (on KNX bus): max. 10 mA (operation) / 5 mA (standby)
• Sensing range: 200° semicircular (maskable), up to 9 m distance at 1.5 m
mounting height
• Light measurement range: 10..2000 Lux
• Plastic housing, lens and mount
• Safety standards: IEC 61000-6-1 / IEC 61000-6-3 / EN 55014 / EN 50491
Environmental Conditions
• Operating temperature: - 20... + 45 ° C
• Relative humidity: 95% non-condensing
• Environmental protection: IP20
• Switching, display and detection elements
The device is equipped with:
• (on the front side) a programming button
• (visible through the lens), a blue programming LED, a red
• red signal LED, a PIR sensor, a brightness sensor and an IR receiver.
Accessories
• The following accessories are available to be ordered separately:
• square frame Form or Flank version
• square plate with 50 x 50 mm window
• a plastic adapter
Dimensions [mm]
EK-SN2-TP-GAA
EK-SN2-TP-GAE
TECHNICAL022EN
128
129
03
Introduction
18
Wall-mount devices
229
DIN-Rail mount modules
297
Supervision
311
Tools
315
Sales kit
321
Technical section
331
General terms of sale
335
General index
