The Ekinex® pushbuttons of 71 series range and related accessories offer the possibility to realize several
variations that will satisfy the most diverse needs. The base is represented by the device which is fitted with a
KNX communication module. The EK-E12-TP-... version of the pushbutton is suitable for mounting into a flush
mounting box, either round or square, provided with fixing holes 60 mm apart, and is also suitable for mounting
into a rectangular wall mounting box 3 seater according to the Italian installation standard provided with fixing
holes 83,5 mm apart. Each pushbutton is delivered with its relative metal support which, in case of necessity, can
also be ordered separately. A plastic adapter and a terminal block complete the supply.
The pushbuttons must be finished off with an operation surface (rockers), a plate with 60 x 60 mm window
and a frame. The rockers are available in square and rectangular shapes of different modularities, in plastic
material, aluminium or Fenix NTM® and in several colours. Version EK-E12-TP-... has integrated LEDs which
can be programmed freely: as an example, as a status feedback or as an orientation light at night time. Two
colour combinations are available for the LEDs: blue / green or red / white. The same version also offers a room
thermostat function, thanks to the integrated temperature sensor. The frames, square and rectangular, are
available in two stylish alternatives (Form and Flank) and are available in plastic material or aluminium and in
several colours and finishings. The ‘NF version of the pushbutton is mounted without frame and is provided with
a side profile in white or black colour.
The pushbuttons simply get connected to the unique signal bus cable and do not require auxiliary power supply;
the devices are supplied at SELV (Safety Extra Low Voltage) voltage, thus offering a much higher safety level than
traditional commands. The configuration and commissioning is carried out by means of the ETS® software. The
related application programs can be downloaded from the www.ekinex.com website.
Pushbuttons - 71 series
WALL-MOUNT DEVICES
71 series: infinite number of combinations
for a unique style. The series of 71 buttons
are available in square or rectangular version
with single, double or triple window (Deep version only).
Pushbuttons 71 series
Description
Code
Page
a) b) Pushbutton 71 series
EK-E12-TP-... o EK-E22-TP-...
84-86
c) Square plate Surface version*
EK-SQS-...
179
d) Square plate*
EK-PQS-...
172
e) Square plate Deep version*
EK-DQP-...
175
f) Rectangular plate Deep version*
EK-DRS-...
176
g) Rectangular plate*
EK-PRS-...
173
h) Rectangular plate Surface version*
EK-SRS-...
180
i) Square rocker (1)
EK-T1Q-...
166
j) Rectangular vertical rockers (2)
EK-T2R-...
k) Square rockers (4)
EK-T4Q-...
l) Rectangular horizontal rockers (4)
EK-T4R-...
m) Metal mounting support
EK-SMQ-71-1
183
n) Metal mounting support with adapter
EK-SMR-71-1
Description
Code
Page
o) Adapter for square Surface plate
EK-TAS-Q-1
179
p) Adapter for square plate - Form or Flank frames
EK-TAQ-1
172
q) Adapter for square plate ‘NF and Deep version
EK-TAQ-1-NF
172-175
r) Adapter for rectangular plate ‘NF and Deep version
EK-TAR-1-NF
173-176
s) Adapter for rectangular plate - Form or Flank frames
EK-TAR-1
173
t) Adapter for Surface rectangular plate
EK-TAS-R-1
180
u) Square frame Flank version
EK-FLQ-...
170
u1) Square frame Form version
EK-FOQ-...
169
v) Rectangular frame Flank version
EK-FLR-...
170
v1) Rectangular frame Form version
EK-FOR-...
169
w) Round flush-mounting box
not delivered by Ekinex®
x) Square flush-mounting box
not delivered by Ekinex®
y) Rectangular flush-mounting box (3 modules)
not delivered by Ekinex®
*) 60 x 60 mm window
g
f
e
o
t
m
q
l
j
p
h
b
a
c
d
i
k
r
t
u
u1
v
v1
w
x
y
n
s
TECHNICAL022EN
82
83
03
Introduction
18
Wall-mount devices
229
DIN-Rail mount modules
297
Supervision
311
Tools
315
Sales kit
321
Technical section
331
General terms of sale
335
General index
