4-fold 0-10 V actuator
DIMMERS
Description
The Ekinex® 4-fold 0-10 V actuator EK-GF1-TP can be used as 0-10 V control output
device or, alternatively, for controlling dimmerable LED power supply units. When
used for LED controlling, the selection of the colour can be made optionally in HSV
or RGB mode. Scenarios, predefined sequences, sequence repetition and random
functions are available; the dimming speed and the holding time are programmable.
The device is fitted with membrane pushbuttons for manual command and LEDs for
status indication; a pushbutton allows the switching between automatic or manual
operation modes. The device integrates a KNX bus communication module and is
realised for mounting on a standard 35 mm DIN-rail. The device is powered by the
KNX bus.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LEDs for status indication of outputs
• Pushbutton for switching operating mode (normal / programming)
• CH pushbutton for individual or simultaneous channels control
• HSV / RGB pushbutton colour control mode
• Connection to bus line with KNX terminal block
• Connection of outputs with screw terminals
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
Technical data
Power supply
• Voltage (control): 30 Vdc by KNX bus
• Rated output stage supply voltage: 100-230Vac, 50/60Hz max 5W
Outputs
• Number: 4
• Range: 0-10 V or 1-10V
• Max. current for each channel: 50 mA
Delivery
Delivery includes a terminal block for connection to the bus and a terminal block for
connection to the auxiliary power supply.
Dimensions [mm]
30
20
20
70
45
72
90
Dev.
Line
Area
bus KNX
-
+ C1/R
C2/G
C3/B
C4/W
-
+
-
+
-
+
L
N
EK-GF1-TP
4xDimmer RGBW 0...10V
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKGF1TP##.knxprod
(download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Order information
Code
Package
EK-GF1-TP
1 pcs.
Description
The Ekinex® EK-GC1-TP 4-fold RGBW LED dimmer allows to regulate independently
the light intensity emitted by 4 LED strips at 12/24 Vdc or, alternatively, to regulate
the light intensity and the colour emitted by a RGB or RGBW LED strip. The device
is suitable for use with LED strips powered at constant voltage. The selection of the
colour can be made optionally in HSV or RGB mode. Scenarios, predefined sequences,
sequence repetition and random functions are available; the dimming speed and the
holding time are programmable. The device is fitted with membrane pushbuttons for
manual command and LEDs for status indication; a pushbutton allows the switching
between automatic or manual operation modes. The device integrates a KNX bus
communication module and is realised for mounting on a standard 35 mm DIN-rail.
The device is powered by the KNX bus and requires an additional 12...30 Vdc to
supply the controlled loads.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LEDs for status indication of outputs
• Pushbutton for switching operating mode (normal / programming)
• CH pushbutton for individual or simultaneous channels control
• HSV / RGB pushbutton colour control mode
• Auxiliary dry contact to disconnect load power supply during standby
• Connection to bus line with KNX terminal block
• Connection of outputs and 12-30 Vdc power supply with screw terminals
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
Technical data
Power supply
• Voltage (strip LED): max 30 Vdc, 16 A
• Voltage (control): 30 Vdc by KNX bus
Outputs
• Number: 4
• Load current for each channel: 4 A
Delivery
Delivery includes a terminal block for connection to the bus.
4-fold RGBW LED dimmer
DIMMERS
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKGC1TP##.knxprod
(download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Order information
Code
Package
EK-GC1-TP
1 pcs.
Dimensions [mm]
72
30
20
20
70
90
45
C1/R
bus KNX
Dev.
Line
Area
+
+
12..30 VDC
-
C2/G
C3/B
C4/W
-
-
-
-
-
230V~/6A max
12..30 VDC
TECHNICAL022EN
260
261
03
Introduction
18
Wall-mount devices
229
DIN-Rail mount modules
297
Supervision
311
Tools
315
Sales kit
321
Technical section
331
General terms of sale
335
General index
