2-fold dimming actuator
DIMMERS
Description
The Ekinex® EK-GA1-TP dimming actuator allows to command and regulate the light
intensity of 2 groups of lighting devices. The device is suitable for the control of
resistive, inductive and capacitive loads powered with 230 Vac. Different types of
loads can be connected to different channels. The device is fitted with membrane
pushbuttons for manual command and LEDs for status indication; a pushbutton allows
the switching between automatic or manual operation modes. The device integrates
a KNX bus communication module and is realised for mounting on a standard 35 mm
DIN-rail. The device is powered by the KNX bus and requires an additional 230 Vac
power supply to operate the loads.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LEDs for status indication of outputs
• Pushbutton for switching operating mode (normal / programming)
• Connection to bus line with KNX terminal block
• Connection of outputs and 230 Vac power supply with screw terminals
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 160 g
Technical data
Power supply
• Voltage (loads): 230 Vac 50/60 Hz
• Voltage (electronics): 30 Vdc by KNX bus
• Current consumption from bus: < 13 mA
• Max. power from bus: 320 mW
Outputs
• Number: 2
• Max. controlled power: 300 W
• Min. controlled power: 10 W
Delivery
Delivery includes a terminal block for connection to the bus.
Dimensions [mm]
70
45
5
25
20
20
72
90
EK-GA1-TP
2xDimmer 20-300W
230Vac ~ 50/60 Hz
-
+
-
+
~/
3
4
C1
~/
5
6
C2
1
2
L
N
C1
C2
bus KNX
Dev.
Line
Area
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKGA1TP##.knxprod
(download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Order information
Code
Package
EK-GA1-TP
1 pcs.
Dimmers
DIN-RAIL MOUNT MODULES
EK-GA1-TP
2-fold dimming
actuator
EK-GC1-TP
4-fold RGBW LED
dimmer
EK-GF1-TP
4-fold 0-10 V
actuator
ON/OFF switching of single or groups of lighting device
•
•
•
Brightness regulation and adjusting the light intensity
•
•
•
Logical gates and forced mode for each channel
•
•
•
Manual control by membrane pushbuttons
•
•
•
Status feedback of output channels through LEDs
•
•
•
Block function for each channel
•
•
•
Without auxiliary power supply
•
•
•
Time scheduling: switching delay for on and off, staircase lighting function
•
•
•
Integration in scenarios
•
•
•
Operating hours counter configurable via bus
•
•
•
Fade adjustable ramps
•
•
•
RGB / HSV operating mode
-
•
•
Mounting on standard 35 mm rail (EN 60715)
•
•
•
TECHNICAL022EN
258
259
03
Introduction
18
Wall-mount devices
229
DIN-Rail mount modules
297
Supervision
311
Tools
315
Sales kit
321
Technical section
331
General terms of sale
335
General index