HEATING AND COOLING
Use as KNX actuator for fan-coil units in combination with an
Ekinex room thermostat.
Use as KNX actuator-controller (integrated controller) for
fan-coil units in combination with
• KNX sensors (temperature value received via bus) or
• NTC temperature sensors (temperature value acquired
through a specific input configuration).
Main functions
• 3-speed or 0-10V fan control with brushless motor and
inverter board
• ON/OFF control of one valve or two valves respectively for 2
or 4 pipe distribution
• Local or centralised heating / cooling switching
• Automatic heating/cooling attenuation at window opening
• Starting the fan according to the actual water temperature
(hot-start / cold-start)
• Fan activation in case of air stratification (large volume
rooms)
• Condensation level monitoring
• Hours of operation monitoring with filter replacement
signaling
LIGHTING AND OTHER ELECTRICAL LOADS
Use as KNX actuator for ON / OFF switching of
luminaires or other electrical loads in combination
with:
• Ekinex KNX pushbuttons or
• traditional (non-bus) pushbuttons of standard
market series by means of special configuration of
the inputs.
SHADING
Use as KNX actuator for controlling and monitoring of
motorized drives for shading devices (roller shutters,
venetian blinds or curtains) or motorized doors / windows in
combination with:
• Ekinex KNX pushbuttons or
• traditional (non-bus) pushbuttons of standard market series
by means of special configuration of the inputs.
Main functions
• Complete run (up and down or open and close)
• Partial run (stop in position from 0 to 100%)
• Position setting
• Slat inclination adjustment (venetian blinds)
• Integration in scenarios
• Lock, forced operation
• Status indication
Input/output module
for hotel applications
Description
The EK-HU1-TP module represents an extremely versatile and compact solution that
integrates in a single device all the functions required to control various types of
room: lighting, climate control, shading, control of electrical loads and input and
output signals.
The module is mounted on a standard 35 mm rail according to EN 60715; thanks
to its very small dimensions (8 modular units, 144 mm wide), also in consideration
of the many functions performed, the module helps to save space in switchboards
and electrical distribution cabinets. In case of need, the front keypad allows manual
operation.
DOOR LOCK CONTROL
Output for sending impulses to an electrical lock for use in
combination with:
• an Ekinex card reader or
• a traditional (non-bus) card reader with signalling contact
connected to an input configured for this purpose;
• other KNX devices (by receiving a communication object
on the bus).
Order information
Code
Package
EK-HU1-TP
1 pcs.
Configuration and commissioning
By means of ETS4 2.0 software (or later versions)
Application program: APEKHU1TP##.knxprod
(## = version, downloadable from www.ekinex.com)
Documentation
For more information, see the STEKHU1TP_EN.pdf technical sheet
available for download from www.ekinex.com
Technical data
Input
Nr.
Use
Analogic
2
for NTC temperature sensors
Digital (generic)
5
to be used individually or coupled
Output
Nr.
Use
Digital
4
to be used individually for ON/OFF switching of loads or coupled for
roller shutters or venetian blinds, 5(3) A relay
1
for control of 1 electric lock (12/24 Vac powered),
5(3) A relay
5
dedicated to fan-coil unit control:
- 3 for 3-speed fan, 5(3) A relay
- 2 for ON / OFF control of valves, 16(10) A relay
Analogic
1
for 0-10 V control of fan (with brushless motor) speed
HOTEL SOLUTIONS
26
27
HOTEL SOLUTIONS
