Description
The Ekinex® EK-FE1-TP binary output / blind actuator allows to command 8 groups
of loads or control 4 drives for motorised blinds independently. The device is fitted
with membrane pushbuttons for manual command (even in the absence of bus power)
and LED’s for status indication; a pushbutton allows to switch between automatic and
manual operation modes. The device integrates a KNX bus communication module
and is realized for mounting on a standard 35 mm DIN-rail. The device is supplied by
the KNX bus and requires an additional 230 Vac power supply to operate.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LED’s for status indication
• Pushbutton for switching operating mode (normal / programming)
• Connection to bus line with KNX terminal block
• Connection of outputs and 230 Vac power supply with screw terminals
• Overvoltage class III (according to EN 60664-1)
• Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
• Pollution degree 2 (according to IEC 60664-1)
• Installation on 35 mm rail (according to EN 60715)
• 4 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 315 g
Technical data
Power supply
• Voltage auxiliary 100-230 Vac 50/60 Hz
• Voltage control section 30 Vdc by KNX bus
• Current consumption from bus < 10 mA
• Power on bus < 240 mW
Outputs
• Number: 8 or 4 independent channels (depending on device use)
• Nominal voltage (Un): 100-230 Vac 50/60Hz
• Nominal current (In): max 16 (10) A (both @100Vac and @230Vac)
• Max. switched power: max 4000 VA @250Vac
Delivery
Delivery includes a terminal block for connection to the bus.
8-fold binary output/
4-fold blind actuator
ACTUATORS
Dimensions [mm]
72
70
5
25
20
20
45
90
1B
2B
3B
4B
1A
2A
3A
4A
EK-FE1-TP
8xD.O. 16(10)A/230Vac ~ 50/60 Hz
4xBlind 16(10)A/230Vac ~ 50/60 Hz
3
4
1A
5
6
2A
7
8
3A
9
10
4A
11
12
1B
13
14
2B
15
16
3B
17
18
4B
1
2
L
N
bus KNX
Dev.
Line
Area
Order information
Code
Package
EK-FE1-TP
1 pcs.
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKFE1TP##.knxprod
(download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Description
The Ekinex® EK-FF1-TP binary output / blind actuator allows to command 16 groups
of loads or control 8 drives for motorised blinds independently. The device is fitted
with membrane pushbuttons for manual command (even in the absence of bus power)
and LED’s for status indication; a pushbutton allows to switch between automatic and
manual operation modes. The device integrates a KNX bus communication module
and is realized for mounting on a standard 35 mm DIN-rail. The device is supplied by
the KNX bus and requires an additional 230 Vac power supply to operate.
Main features
• Plastic casing
• Frontal programming pushbutton and LED
• Membrane keyboard with LED’s for status indication
• Pushbutton for switching operating mode (normal / programming)
• Connection to bus line with KNX terminal block
• Connection of outputs and 230 Vac power supply with screw terminals
• Overvoltage class III (according to EN 60664-1)
• Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
• Pollution degree 2 (according to IEC 60664-1)
• Installation on 35 mm rail (according to EN 60715)
• 8 modular units (1 MU = 18 mm)
• IP20 protection degree (installed device)
• Weight 595 g
Technical data
Power supply
• Voltage auxiliary 100-230 Vac 50/60 Hz
• Voltage control section 30 Vdc by KNX bus
• Current consumption from bus < 10 mA
• Power on bus < 240 mW
Outputs
• Number: 16 or 8 independent channels (depending on device use)
• Nominal voltage (Un): 100-230 Vac 50/60Hz
• Nominal current (In): max 16 (10) A (both @100Vac and @230Vac)
• Max. switched power: max 4000 VA @250Vac
Delivery
Delivery includes a terminal block for connection to the bus.
16-fold binary output/
8-fold blind actuator
ACTUATORS
Dimensions [mm]
144
5
25
20
20
70
90
45
3
4
1A
19
20
1B
21
22
2B
23
24
3B
25
26
4B
27
28
5B
29
30
6B
31
32
7B
33
34
8B
5
6
2A
7
8
3A
9
10
4A
11
12
5A
13
14
6A
15
16
7A
17
18
8A
1
2
L
N
bus KNX
1B
2B
3B
8B
1A
2A
3A
8A
EK-FF1-TP
16xD.O. 16(10)A/230Vac ~ 50/60 Hz
8xBlind 16(10)A/230Vac ~ 50/60 Hz
4B
5B
4A
5A
6B
7B
6A
7A
Dev.
Line
Area
Configuration and commissioning
By means of ETS5 software or later versions
Application program APEKFF1TP##.knxprod
(download from www.ekinex.com)
Documentation
For more information see the technical documentation,
download from www.ekinex.com
Order information
Code
Package
EK-FF1-TP
1 pcs.
TECHNICAL024EN
272
273
03
Introduction
17
Wall-mount devices
247
DIN-Rail mount modules
315
Visualisation
331
Audio Multiroom
379
IP Door Phone
397
Lift TV
409
Tools
413
Sales kit
419
Technical section
429
General terms of sale
433
General index
