3/8”
3/4”
1/4”
5/8”
ECLISSE offers door manufacturers
an extruded aluminum guide section,
specifically designed and developed
to be fitted into the bottom of sliding
pocket doors.
This profile is easy to fit even on an
already installed pocket door without
requiring any special operations apart
from routing.
The advantages offered by the
Anti-warp Profile are an improved
sliding action and an increased wear
resistance and protection against
deformation due to humidity.
Profile length: 43".
Note: Included with Self Closing
System
ECLISSE PUSH&PULL is the exclusive
accessory for sliding pocket door
systems which allows the door panel
to be pulled out of the door pocket
with a light pressure. This makes it
easier to grip the door and makes it,
therefore, handier to close.
Suitable for both wooden and glass
doors, thanks to the extractable
track patented by ECLISSE it can
be installed on an already mounted
counterframe too.
It can be used alone or in conjunction
with the BIAS (Soft Closer) only.
ECLISSE PUSH&PULL C:
Passage width for single door:
24"÷48"
Passage width for double door:
24"+24"÷48"+48"
Maximum door weight: 110 lbs.
ECLISSE PUSH&PULL S:
Passage width for single door:
24"÷48"
Passage width for double door:
24"+24"÷48"+48"
Maximum door weight: 110 lbs.
Note: double door models require an
accessory for each door panel.
Detail of the door panel
with standard door
guide (milled only).
Detail of the door panel
with anti-warp profile
installed.
ECLISSE PUSH&PULL C
For ECLISSE Classic
Collection
ECLISSE PUSH&PULL S
For ECLISSE Syntesis
Collection
The joining kit is a universal accessory
that allows to get a double sliding
pocket door system using two single
systems.
Suitable for ECLISSE SINGLE and
ECLISSE LUCE SINGLE.
A double door system made by
using two single door systems differs
from a standard ECLISSE DOUBLE
or ECLISSE LUCE DOUBLE as the
passage width (see "W" in the size
table of the model) increases by 2".
Allows you to install wiring in the same
wall where the frame is placed for
shallow boxes for thermostats, outlets,
etc. With the metal Wiring Channel,
you will be able to make full use of the
wall of your pocket door.
Only compatible with 2x6 wall frame
kit.
Available for the ECLISSE SYNTESIS
SLIDE DOUBLE and ECLISSE
SYNTESIS LUCE DOUBLE models,
this accessory allows you to open and
close the two doors simultaneously
by moving only one door at a time.
This accessory increases functionality,
especially for wide passage sizes.
It can be installed to the above models
with DW=24"+24" to 42"+42".
Only for wooden doors.
It comes as standard with ECLISSE
BIAS.
With 55+55 lbs door panels,
ECLISSE BIAS slows down the
movement and closes the door panels.
For doors with a weight up to
110+110 lbs, the device only slows
down the movement.
A device that ensures a simultaneous
and smooth movement of the door
panels which slide into the same
direction. It can be applied on
ECLISSE TELESCOPIC SINGLE and
ECLISSE TELESCOPIC DOUBLE with
door widhts from 24"+24" to 48"+48".
It can be used with ECLISSE BIAS.
For panels up to 55+55 lbs the
device slows down and closes the
doors.
For panels over 55+55 lbs up to
110+110 lbs the device only slows
down the doors.
ECLISSE TELESCOPIC DOUBLE
needs 2 synchronizations + 2 soft
closers.
When fully opened, the door panels
protrude slightly from the jambs.
Max door weight 176 lbs.
Suitable for living rooms, terraces,
meeting rooms, etc.
JOINING KIT FOR DOUBLE DOORS
ANTI-WARP PROFILE
ECLISSE PUSH&PULL
LUCE KIT
DOUBLE DOOR CO-ORDINATION
FOR SYNTESIS
TELESCOPIC
SYNCHRONIZATION
ACCESSORIES
FOR ECLISSE SLIDING DOORS
ACCESSORIES
FOR ECLISSE SLIDING DOORS
ACCESSORIES
SPECIAL
PRODUCTS
86
87
ACCESSORIES
ACCESSORIES
