Masking tape applied
along the entire
perimeter to protect
the profiles.
Masking tape applied
along the entire
perimeter to protect
the profiles.
2
1
4
4
5
5
1
3
3
2
ECLISSE
— 36 —
ECLISSE
— 37 —
The installation
Easy and quick assembly
ECLISSE 40 FRAME
ON STUD WALL
Once the frame has been removed
from the packaging, place it inside
the wall opening prepared with a
reinforced studwork or a solid wood
structure.
Fix ECLISSE 40 carefully checking
the correct levelling of the frame.
Remove the OSB spacers.
DO NOT REMOVE THE
CARDBOARD PROTECTIONS.
ECLISSE 40 FRAME
ON SOLID WALL
Once the frame has been removed
from the packaging, place it inside
the wall opening carefully checking
the correct levelling of the frame.
Fix ECLISSE 40 by blocking the
6 clamps (3 on each sides) with
mortar inside the holes previously
made in the bricks.
DO NOT REMOVE THE
CARDBOARD PROTECTIONS.
Remove the protections from the frame.
Secure the door panel and its hardware.
Then proceed with the painting of the door
(if it is a raw primer-coated door panel).
DO NOT remove the anti-scratch film until
the door installation is complete.
DO NOT remove the cardboard protections.
Place masking tape on both sides along
the entire perimeter to protect the visible
aluminium part and plaster.
Apply the plasterboards.
The application of a plasterboard scrim tape
along the entire perimeter is recommended.
Apply and remove the adhesive tape after
each finishing coat before it dries to avoid
cracks.
Sectional view of the screw on the studwork.
Flush to the wall finish.
Remove the protections from the frame.
Secure the door panel and its hardware.
Then proceed with the painting of the door
(if it is a raw primer-coated door panel).
DO NOT remove the anti-scratch film until
the door installation is complete.
Apply and remove the adhesive tape after
each finishing coat before it dries to avoid
cracks.
DO NOT remove the cardboard protections.
Place masking tape on both sides along
the entire perimeter to protect the visible
aluminium part and plaster.
Proceed to plaster and skim the wall.
Sectional view of the anchor clamp.
Flush to the wall finish.
ECLISSE 40 Collection | Installation
