L
N
Driver
PHILIPS
L N
LED
IDC
Rset
LEDset
Black wire LED: -
Red wire LED: +
Setting the correct driver output current
Driver output current is set using a resistor. Resistors are insert by Doxis Lighting Factory.
Always make sure the correct Rset plug or resistor is inserted BEFORE switching on the luminaire!!!
*max. 700mA for
Atlas semi-recessed
Only to be installed by a qualified electrician.
Doxis cannot be held responsible for damage caused by incorrect settings or incorrect installation.
Driver “Mono 700” & “Mono 1050” non dimmable
art. nr. 490.24.36 & 492.24.36
Independant LED driver
OR
LED power
350mA
500mA
700mA
1000mA
1050mA
LEDset
14300Ω
10000Ω
7150Ω
4990Ω
4750Ω
Rset (2)
715Ω
1150Ω
1870Ω
3400Ω
3650Ω
Rset or LEDset
must be inserted
Please check if resistor is corectly fxed
Check if resistor legs do not cross
IDC LEDset
IDC
Rset
Atlas*:
Atlas*:
Installation information:
Wire section 0.2-1.5mm²
Max 600mm distance from driver to LED
Inrush current: 18.6A
Inrush current 1/2 value time (Twidth): 240µs
Power factor (λ max): ≥0.90
Max. nr. of drivers on single circuit:
MCB 10A type B: 20
MCB 16A type B: 34
MCB 20A type B: 42
MCB 25A type B: 52
MCB 10A type C: 34
MCB 16A type C: 56
MCB 20A type C: 70
MCB 25A type C: 88
Dimensions: 155x43.2x30mm
A07
