TEC 6
deltalight.com
PRESENCE DETECTION
By adding a presence detection sensor to a luminaire, energy consumption can be reduced while user comfort is raised. The sensor can switch luminaires on or off, according to the occupation in
the room and the specific needs and wishes of the user. Time between departure and lights off (hold time), plus the detection zone, can be programmed to match the needs of your project.
The presence detection sensor is particular for the Supernova Line range and needs to be installed inside the luminaire, avoiding visible sensors and resulting in clean ceilings and walls.
PRESENCE + DAYLIGHT DETECTION
Together with presence detection, also daylight detection provides energy savings in spaces with a lot of incoming daylight.
The sensor captures the amount of daylight coming into the room and changes the light output of the luminaire according to the specific level of lux that is wanted in the room. In this way, luminaires
will provide nearly no light on bright, sunny days and will be at full power on cloudy, grey days. To be used in the Streamliner profile, this sensor combines both presence and daylight detection, to
allow you to reduce energy consumption to a minimum. For proper functioning of the daylight detection, this sensor needs to be visible and comes in an additional profile module. A remote control
can be used to change the settings to your preference.
3 SETTINGS
3 SETTINGS (PROGRAMMABLE BY INFRARED PROGRAMMING UNIT)
H6m
1m
2m
3m
4m
5m
6m
W6m
H4m
1m
2m
3m
4m
W6,5m
LIGHT
TIME
A
B
D
C
1/ DETECTION PATTERN
1/ DETECTION PATTERN
2 / HOLD-TIME
5 SECONDS / 30 MIN
2 / LIGHT LEVEL
BASED ON DAYLIGHT
3 / DAY-NIGHT
3 / DELAY TIME
+
CORRIDOR FUNCTION
L 200
HF SENSOR
HF SENSOR
DETECTION
DAYLIGHT DETECTION
PRESENCE
PRESENCE +
300 90 311
220-240V / 50-60Hz
INVISIBLE MOUNTING
MAX. 400W LED POWER
IP20
SRL-AMBIENT LIGHT &
MOTION SENSOR DIM2
389 92 00 ED2
ANO / B / W
220-240V / 50-60Hz
IP20
INFRARED
PROGRAMMING UNIT
300 90 019
EXCL.MOUNTING IN SUPERNOVA LINE
PRESENCE
DETECTION
