HOW TO READ THE WORKBOOK
In compliance with the regulations in force, the manufacturer reserves the right to make any styling or technical changes without prior notice.
Such changes also include the type and wattage of light sources and electronic parts. These changes are due to market availability issues since it is
continuously growing and evolving, and it tends to eliminate certain products in favour of others, discontinuing their production without notice (which is
increasingly often the case with LED bulbs).
According to regulation 2017/1369, starting from 01/03/2022 the new energy efficiency classification comes into force, which also concerns light sources.
The rating scale goes from A (maximum efficiency) to G (minimum efficiency), replacing the previous scale from A +++ to D, as required by Directive 2010/30 /
EU currently in force. Based on warehouse supplies, we will update the indication of the energy class in our documentation.
In our website we will also provide the link to access all information concerning the light sources supplied: some datas (such as lumen or wattage) might vary
from what mentioned in the workbook, as they are measured on the pure sources, not on our appliances.
The Catellani & Smith Workbook is designed to help and protect the customer in his/her choice of products. We therefore recommend that you read each
section thoroughly, given the complexity of the electronic parts, and that you check the compatibility between the various components (such as dimmers, light
sources, etc.) and contact qualified staff for the choice and installation of products.
Whilst every care has been taken in preparing this catalogue, the given information may have changed after publication, without prior notice from our side.
The design and specification of products are subject to change, in the interest of improvement.
Catellani & Smith cannot accept any responsibility for the consequences of the use of the given information.
GENERAL INFORMATION
Our production started off and continues to be of an artisanal nature. Our lamps are not produced in large series, from moulds or sophisticated plants but they
are hand-crafted by our artisans. Slight flaws are thus not to be considered defects, but rather the typical characteristics of manual work.
Catellani & Smith declares under its own responsibility that its products meet the essential requirements of EC directives and comply with EN 60598 for
luminaires and related components.
Catellani & Smith lamps are built with a voltage of 230V. The pricelist specifies which luminaires are compatible with a voltage of 110V (with standard EC
components and not with UL certified components) and which ones can be compatible upon request, by making some styling and technical modifications
(price estimate to be provided).
Production is tested 100%: each product undergoes a thorough quality control that guarantees it is intact and fully functional. The guarantee covers the item
for 2 years from the date of purchase, including the right to a replacement or to the repair of the product or parts thereof affected by manufacturing defects
detected at the time of purchase or that arise over the next two years. The guarantee does not cover any damage to luminaires caused by connection to
incompatible dimmers or control and dimming systems. Compatibility of our products with dimmers or home automation systems must be checked prior to
purchase and it is the responsibility of the customer or person acting for him/her.
The guarantee does not include any refunds for the intervention of qualified staff (electrician, etc.) or costs for the installation/disassembly or costs related to equipment
(such as scaffolding access platforms, scaffolding, etc.) required to access the luminaires and perform maintenance and control operations on them.It is advisable
always to test the luminaires on the ground before final installation if they are to be fitted under special circumstances or connected to control and dimming systems.
Colore
[ Finishes ] // Untreated brass (an alloy of copper and zinc) is a very elegant finish, yellow-gold in colour, with an
excellent corrosion resistance. We use it untreated, therefore it may oxidise with time. Regular cleaning helps preserving
its original appearance and slow down the ageing process, which might be anyway accelerated by the weather, frequent
handling or conditions of high humidity.
[ Note ] // The lumen value refers to the rated lumen output of the light source; for the lamp’s output please refer to our bim files (see website). / ( * ) The plug
driver 110-240V is supplied with the electrical plug suitable for the market of reference only. Please specify in stage of order if the destination of the product
differs from your standard.
p. 47
Ettorino / table lamp
voltage
source
type
watt
lumen
K
CRI
en. class
driver/transformer
dimming
52 cm ca.
73 cm ca.
ETRT / colourful (white/red/yellow/blue) / red man silhouette / nickel dimmer / blue wire
€
1.700,00
110-240V
constant current
LED 300 mA
COB LED
1x10W
1441
2700
>80
E
constant current
plug driver*
push included
(memory last step)
ETRTB / black / red man silhouette / nickel dimmer / black wire
€
1.600,00
ETRTW / white / red man silhouette / nickel dimmer / blue wire
€
1.600,00
price
VAT excluded
code / finish / model / infos
drawing with
main dimensions
wattage detail
referring to the source
supplied
Kelvin degrees
referring to the source
supplied
dimming / dimmer / on/off
indicates if the lamp is dimmable
(if yes, how you can dim it) or else if
the dimming (dimmer) is included
energy class referring
to the source included
here are some extra information
regarding the electrical
components of the lamps
(ie. power supply, dimming)
here are summarized
the main finishes of the
products in the collection
collection
name
type
lumen or candelas
referring to the source
included
RA referring
to the source
included
it refers to the
type of driver
supplied
type of lighting
source supplied
type or socket
of the lighting
source supplied
it refers to the voltage of the standard model (usually 230V) and
the possibility to have it 110V according to the following list:
110V-240V: the lamp is already compatible for both voltages;
110V or 230V: the lamp can be supplied in both voltages, in
some cases without bulb when 110V;
110V version on request: the standard lamp is not 110V, but it
can be supplied on request with some modifications;
230V: the lamp is available for this voltage only
page nr. of
reference of
the lamp in the
related catalogue
