PSU (POWER SUPPLY UNIT) KITS FOR JACKIE O/GOLD MOON/SYPHASPOT/SPOTLIGHT IC-JC
By means of the PSU kit, multiple LED lamps can be controlled simultaneously
through a connection board connected to a driver.
The basic board can connect up to 12 lamps; we can combine 2 boards to
connect up to 24 lamps.
It is advisable to install the kit in a technical compartment at a maximum distance
of about 5 meters from the point of installation of the jacks or tensioners, in
order to avoid voltage drops.
The technical compartment must be located in an easily accessible place and
large enough to accommodate both the wired multiple connection board and
the power supply.
PSU KITS
K9WS12
20W driver kit 220-240V (with ED9)
lamps quantity: min 3 / max 12 x1,1W or min 3 / max 12 x1,2W
Triac dimmable
driver dimensions 11x5,2x2,2 cm
K10WS12
20W driver kit 110-240V (with ED10)
lamps quantity @240V: min 2 / max 12 x1,1W or min 2 / max 12 x1,2W
lamps quantity @110V: min 2 / max 12 x1,1W or min 2 / max 11 x1,2W
1...10V or PUSH dimmable
driver dimensions 11x5,2x2,2 cm
K11WS12
20W driver kit 110-240V (with ED11)
lamps quantity @240V: min 2 / max 12 x1,1W or min 2 / max 12 x1,2W
lamps quantity @110V: min 2 / max 12 x1,1W or min 2 / max 12 x1,2W
DALI dimmable
driver dimensions 11x5,2x2,2 cm
K12WS24
30W driver kit 220-240V (with ED12)
lamps quantity: min 13 / max 24 x1,1W or min 13 / max 22 x1,2W
Triac dimmable
driver dimensions 18x6x3,5 cm
K13WS24
36W driver kit 110-240V (with ED13)
lamps quantity @240V: min 13 / max 24 x1,1W or min 13 / max 24 x1,2W
lamps quantity @110V: min 13 / max 24 x1,1W or min 13 / max 22 x1,2W
DALI or PUSH dimmable
driver dimensions 16,5x4,1x3,5 cm
116
DRIVERS @24V DC FOR PEPITA 65 / PEPITA 102 / JACKIE O / GOLD MOON / SYPHASPOT / SPOTLIGHT
By means of the driver, multiple LED lamps can be controlled simultaneously.
In the event of a failure of even a single lamp, the other lamps continue working
properly.
It is advisable to install the driver in a technical compartment accessible
for inspection at a maximum distance of about 5 meters from the point of
installation of the lamps, in order to avoid voltage drops.
The technical compartment must be located in an easily accessible place and
large enough to accommodate the power supply.
DRIVERS @24V DC
ED9
rated voltage 220-240V
rated output 20W
lamps quantity: min 3 / max 13 x1,1W or min 3 / max 12 x1,2W
Triac dimmable
dimensions 11x5,2x2,2 cm
ED11
rated voltage 110-240V
rated output 15W @110V // lamps quantity: min 2 / max 12 x1,1W or min 2 / max 11 x1,2W
rated output 16W @240V // lamps quantity: min 2 / max 12 x1,1W or min 2 / max 11 x1,2W
DALI dimmable
dimensions 11x5,2x2,2 cm
ED14
rated voltage 110-240V
rated output 4W
lamps quantity: min 1 / max 3 x1,1W or min 1 / max 2 x1,2W
not dimmable
dimensions 4x2,7x2,1 cm
117
