78
Standard H angi ng Opt i ons
Flat Ceiling Rose
CCR small
DA standard cable grips
FCR small
CCR large
DA articulated cable grips
FCR large
Cylindrical Ceiling Rose
Direct Attach
Max. capacity: 3 rings
Standard dimensions: 7.5x12cm
Single cable grip per suspension cable
Standard dimensions: 1.5x3.5cm
Max. capacity: 3 rings
Standard dimensions:
25.5x3cm
Max. capacity: 6 rings
Standard dimensions:
10x15cm
Single cable grip per suspension cable
Standard dimensions: 1x5.5cm
Max. capacity: 8 rings
Standard dimensions:
33x3cm
Bespoke options and design service available.
Date:
19/12/2017
Project:
CDH Standard Details
Drawing No:
DR-CDH-002-REV B
Product name:
Ceiling Rose Large Typical Installation
Contact CDH for more details
Scale: 1:2 @ A3 Drawn by: RMO
Drivers available in all dimming
protocols
02- Ceiling Rose - Reflected Ceiling Plan
5mm Wood Screw or other fixing
to suit ceiling substrate by others
ø 290mm Ceiling Rose Body
Required 5mm Countersunk
Wood Screw to Ceiling
Ceiling By Others
5mm Wood Screw or other fixing
to suit ceiling substrate by others
ø 290mm Ceiling Rose Body
Magnets to Affix C.R. Body to Cover Plate
Articulated Cable Grips
ø 330mm Ceiling Rose Cover Plate
01- Ceiling Rose - Elevation View
24Volt Lighting Cable to Driver
Plywood Pattress By Others
Access to ceiling void required
24V to Driver
(Do Not Connect To Mains)
ø 330mm Ceiling Rose Cover Plate
(Not shown for illustrative purposes)
To Fixture
Notes:
Fix ceiling rose assembly
to ceiling with coloured
dots pointing downward.
Make certain that ceiling is capable
of supporting the weight of the entire
light, it is recommended that you
seek the advice of a structural engineer
or construction professional.
The appropriate fixing will vary
depending on ceiling substrate
therefore these have not been supplied,
use an appropriate fixing
to suit your situation.
This should carried out by a suitably
qualified electrician. Do not turn on
the power.
Ensure ceiling rose cover plate is firmly
fixed and not obstructed by protruding
screw heads.
To Fixture
To Fixture
To Fixture
Suspension Cables to pass through
Ceiling Rose body. Do not connect
directly to cable grips
To Fixture
To Fixture
Suspension only
Positive Polarity
Negative Polarity
Date:
19/12/2017
Project:
CDH Standard Details
Drawing No:
DR-CDH-002-REV B
Product name:
Ceiling Rose Large Typical Installation
Contact CDH for more details
Scale: 1:2 @ A3 Drawn by: RMO
Drivers available in all dimming
protocols
02- Ceiling Rose - Reflected Ceiling Plan
5mm Wood Screw or other fixing
to suit ceiling substrate by others
ø 290mm Ceiling Rose Body
Required 5mm Countersunk
Wood Screw to Ceiling
Ceiling By Others
5mm Wood Screw or other fixing
to suit ceiling substrate by others
ø 290mm Ceiling Rose Body
Magnets to Affix C.R. Body to Cover Plate
Articulated Cable Grips
ø 330mm Ceiling Rose Cover Plate
01- Ceiling Rose - Elevation View
24Volt Lighting Cable to Driver
Plywood Pattress By Others
Access to ceiling void required
24V to Driver
(Do Not Connect To Mains)
ø 330mm Ceiling Rose Cover Plate
(Not shown for illustrative purposes)
To Fixture
Notes:
Fix ceiling rose assembly
to ceiling with coloured
dots pointing downward.
Make certain that ceiling is capable
of supporting the weight of the entire
light, it is recommended that you
seek the advice of a structural engineer
or construction professional.
The appropriate fixing will vary
depending on ceiling substrate
therefore these have not been supplied,
use an appropriate fixing
to suit your situation.
This should carried out by a suitably
qualified electrician. Do not turn on
the power.
Ensure ceiling rose cover plate is firmly
fixed and not obstructed by protruding
screw heads.
To Fixture
To Fixture
To Fixture
Suspension Cables to pass through
Ceiling Rose body. Do not connect
directly to cable grips
To Fixture
To Fixture
Suspension only
Positive Polarity
Negative Polarity
Ceiling Plan
Elevation View
