B30
CODE COMPOSITION
T048 T 01 _ 1 _ 1
length
01
1000 mm
02
2000 mm
03
3000 mm
finishing
W1
white RAL 9016
B1
black RAL 9005
example of code composition
T048 T 01 W1 1 01 1
TECHNICAL FEATURES
Code
T048 T 01 XX
Type
Low voltage track
Material
Aluminum
Finishing
White RAL 9016 | Black RAL 9005
Weight
-
Mounting
Surface | Suspension
IP rating
-
Insulation class
III
Control gear
Remote power supply (not included)
Dimensions
A: 1000 mm | 2000 mm | 3000 mm
Cut out for plasterboard
-
Voltage connection
48 VDC
Circuits
2 x ±15 A · 48 VDC |
1 x ±15 A · 48 VDC + D+/D-
Note
B30 is a 48V powered electrical system and limited to a
maximum current of 15 A.
The supply connectors, plugs and further fixture accessories
must be ordered separately.
Any 90° connector must be ordered separately to ensure
electric continuity in the corners.
Light points cannot be installed in the corners.
For ceiling or wall mounting, it’s possible to fix the rail
directly with self-tapping countersunk head screws, while the
suspended installation requires the purchase of the specific kit.
The tracks and their components must be installed following the installation instructions provided by the company.
Sistema di illuminazione da interno, per installazione a sospensione e a
superficie. Binario e corpi sono gestibili con sistemi di controllo remoto
DALI e 1-10V. Il profilo ha lunghezza compresa fra 1 m e 3 m, estruso
in alluminio con due finiture bianco e nero, è dotato di conduttori 48V.
B30 a 48V si completa a sua volta con tutti i prodotti di illuminazione
Buzzi & Buzzi dotati di attacchi con un’elettronica integrata.
È vietato utilizzare alimentatori, driver, sistemi Bus Dati e componenti
non omologati SELV e/o che abbiano una U-OUT > 60Vdc.
Si raccomanda l’utilizzo di un ripetitore optoisolato DALI compatibile per
rendere compatibile un comando FELV in SELV (vedi codice:
T048 A 00078 00).
Lighting system for interiors, for pendant and surface installation. Track
and structures can be managed by DALI and 1-10V remote control
systems. The length of the profile is between 1 and 3 m, extruded in
aluminium with two white and black finishes, it is fitted with 48V wires.
The 48V B30 is in turn completed with all the Buzzi and Buzzi lighting
products equipped with sockets with integrated electronics.
The use of NON SELV or U-OUT > 60Vdc power supplies, drivers and
components is strictly forbidden.
Is recommended the usage of an opto-insulated repeater DALI to
convert FELV into SELV ( code: T048 A 00078 00).
LIGHT MODULES
matt black RAL 9005 painted
matt white RAL 9016 painted
60 VDC
Data BUS
64
56
26
28
58
44
32
52
68
48
36
40
60
C1 48V
ML 48V
U1 48V
X1 48V
GL 48V
Q1 48V
Y1 48V
INCISO Q4 48V
L1 48V
Q4 48V
Z1 48V
M1 48V
THE TUBE 48V
www.buzzi-buzzi.it | 83
Indoor 48V Tracks
82 |
