CODE COMPOSITION
T048 A 00002 B1
CODE COMPOSITION
T048 A 00004 B1
CODE COMPOSITION
T048 A 00006 B1
CODE COMPOSITION
T048 A 00008 B1
TESTATA
DI ALIMENTAZIONE
POWER HEAD
GIUNTO FLESSIBILE
FLEXIBLE JOINT
GIUNTO PASSANTE
THROUGH JOINT
GIUNTO ANGOLARE A 90°
90° CORNER JOINT
TECHNICAL FEATURES
Code
T048 A 00002 B1
Type
Non-polarised
power head
Material
Polycarbonate
Finishing
Black
RAL 9005
Fixing
Plug-in
Insulation class
III
Voltage
connection
15 A max · 48 VDC
Note
-
TECHNICAL FEATURES
Code
T048 A 00004 B1
Type
Non-polarised through
joint
Material
Polycarbonate
Finishing
Black
RAL 9005
Fixing
Plug-in
Insulation class
III
Voltage
connection
15 A max · 48 VDC
Note
Used to connect two
tracks and to guarantee
the supply of current.
TECHNICAL FEATURES
Code
T048 A 00006 B1
Type
Non-polarised 90°
corner joint
Material
Polycarbonate
Finishing
Black
RAL 9005
Fixing
Plug-in
Insulation class
III
Voltage
connection
15 A max · 48 VDC
Note
Used to connect two
tracks joined at 90° and
to guarantee that current
reaches the corners.
Light points cannot be
installed
in the corners.
TECHNICAL FEATURES
Code
T048 A 00008 B1
Type
Flexible joint
Material
Polycarbonate
Finishing
Black
RAL 9005
Fixing
Plug-in
Insulation class
III
Voltage
connection
15 A max · 48 VDC
Note
Used to connect two
tracks installed on
different surfaces
(ceiling-wall)
or to create different
angles from 90° and to
guarantee power supply.
Light points cannot be
installed
in the corners.
The tracks and their components must be installed following the installation instructions provided by the company.
CODE COMPOSITION
TRK 00000 42
TECHNICAL FEATURES
Code
TRK 00000 42
Type
Conductor cutting pliers
Material
-
Finishing
-
Fixing
-
Note
The 1000/2000/3000
mm long tracks are
supplied with copper
wires already tested
with respect to the
aluminium in order to
prevent the copper
terminals from coming
into contact with each
other, in the case of
double power supply,
or, to prevent them from
touching each other, if
closure plugs are used.
If it should be
necessary to shorten
the length of the track
during installation, use
the special cutting
nippers taking care
to pull out the four
wires by at least 5 mm
to guarantee correct
electric distances.
TRONCHESE
CUTTER
CODE COMPOSITION
T048 A 00023 B1
TECHNICAL FEATURES
Code
T048 A 00023 B1
Type
Reinforcement bracket
Material
Aluminum
Finishing
Black
RAL 9005
Fixing
By screws
Note
Reinforcement bracket
used to give rigidity
to the joint of the
tracks and to prevent
mechanical vibrations.
We recommend using
three brackets at every
track joint.
STAFFA DI RINFORZO
REINFORCEMENT BRACKET
CODE COMPOSITION
T048 A 00025 00
KIT SOSPENSIONE
SUSPENSION KIT
TECHNICAL FEATURES
Code
T048 A 00025 00
Type
Suspension kit
Material
Steel
Finishing
-
Fixing
-
Note
The kit is to be used
when the B-INSIDE
track is fitted before
installing the plaster
panel.
Kit composed of ceiling
fixture bracket, M4 nut,
threaded M6 bar 1000
mm long, suspension
clip in steel with M6
screw coupling.
CODE COMPOSITION
T048 A 00079 B1
KIT GIUNTO MECCANICO
ANGOLARE ORIZZONTALE
HORIZONTAL CORNER
JOINT KIT
TECHNICAL FEATURES
Code
T048 A 00079 B1
Type
Trimless joint for use
on the same flat surface
Material
Aluminium body
Finishing
Black
RAL 9005
Fixing
By 2 brackets (included)
Note
The mechanical corner
joint allows to join two
B-INSIDE tracks with
90°angle avoiding the
45°cut.
Is necessary to be
associated to
T048 A 00008 B1 code
to allow electrical and
signal continuity.
The code includes
2 brackes for fixing.
78 |
www.buzzi-buzzi.it | 79
Indoor 48V Tracks
B-INSIDE
78 |
www.buzzi-buzzi.it | 79
Indoor 48V Tracks
B-INSIDE
B-INSIDE Components
