Produktsysteme | Fasertechnik
Größenangaben in mm | Alle Preisangaben verstehen sich als unverbindliche Preisempfehlung (UVP) in Euro ohne MwSt.
Irrtümer vorbehalten. | Bestellung erfolgt zu unseren ab der Seite 726 abgedruckten Allgemeinen Verkaufsbedingungen.
537
1.
2.
3.
4.
5.
Lichtleitertechnik
Effektvoll Räume inszenieren mit
PMMA-Kunststoff-Faser
Faserinstallation
Fünf einfache Schritte
zum Sternenhimmel
Spezialprodukt
Anwendungsgebiete
Innenbereich:
Büros, Aufzüge, Lobbies, Handläufe, Sternen-
himmel, Richtungszeichen, Allroundbeleuchtung
Außenbereich (ummantelte Fasern
verwenden!):
Fassaden, Treppen, Säulen, Vordächer, Brunnen,
Werbeschilder, Wegweiser
Öffentliche Zonen:
Kunsthallen, Museen, Parks, Stadien, Brücken,
Flughäfen, Kirchen, Krankenhäuser
230V
L1
PE
N
230 V AC
1. Die Lichtquelle (230 V AC / 50 Hz)
•
Gehäuse „steckerfertig“ zum Anschluss an eine
konventionelle 230 V - Steckdose
•
LED-Technik mit geringem Energieverbrauch und
hoher Lebensdauer
•
Kompakte Bauweise
•
dimmbar und steuerbar mit unterschiedlichen
Ansteuerungstechniken
•
Farbsteuerung
2. Die Faser
•
Natürlicher Lichttransport
•
Hohe Flexibilität durch kleinen Biegeradius
•
Maximale Anzahl der Fasern pro Projektor
500 x S0 (Ø 1,0 mm); 150 x S2 (Ø 2,0 mm);
50 x S3 (Ø 3,0 mm)
•
Kombination verschiedener Fasern ist möglich
(auf Anfrage)
•
1. Lichtpunkte verteilen und Löcher bohren
•
Bei Deckengrößen bis 10 m2 empfehlen wir 50
Fasern/m2, darüber hinaus reichen 30 bis 40
Faser/m2 . Einfache Installation der Faser; z.B.
bei 1,0 mm Faserstärke Bohrung von 1,1 mm
vornehmen.
Damit die Sichtseite nicht ausbricht, bohren Sie
die Löcher bitte von der Sichtseite.
Installation faseroptischer Anlagen
•
Der Projektor sollte so positioniert werden, dass ein Leuchtmitteltausch jederzeit möglich ist.
•
Bei der Projektierung der Anlage ist der Projektor möglichst zentral anzuordnen, um die Faserlänge gering
zu halten.
•
Zur problemlosen Installation des Bündels sollte an der Konnektor-Eingangsseite 300 mm Freiraum
vorhanden sein.
•
Der Anschluss kann über einen Deckenanschluss oder über eine Steckdose erfolgen.
•
Beachten Sie, dass der Faserendpunkt keinen Temperaturen über 90 °C ausgesetzt wird.
•
Die Faser darf ausschließlich mit Klebern aus unserem Sortiment fixiert werden. Siehe Seite 536, Artikel 90199
Spezialprodukt faseroptische Beleuchtungssysteme
Verwendungszweck: Das Prinzip der faseroptischen Beleuchtungssysteme ist die Übertragung des Lichts durch
ein Lichtleiterbündel. Diese Systeme dienen der dekorativen Beleuchtung. Anwendung findet es hier, für den
Aufbau eines “künstlerischen Sternenhimmels”.
Eine andere Anwendung, außerhalb dieses Verwendungszwecks ist nicht erlaubt.
Dieses Produkt ist zur Raumbeleuchtung im Haushalt nicht geeignet.
3. Die Endstücke
•
Potentialfrei
•
Temperaturfreies Licht
•
Keine UV- / IR-Strahlung
•
Einfache Montage
•
Große Auswahl an dekorativen und
technischen Endstücken
•
2. Fasern in die Löcher stecken.
Lassen Sie die Faser ausreichend überstehen.
Die Fasern werden später gekürzt.
•
3. Fasern oberhalb der Deckenplatte
verkleben.
•
4. Evtl. Deckenanstrich vornehmen.
•
5. Fasern unterhalb der Deckenplatte kürzen
(3-5 mm herausstehen lassen).
Maximale Bündelung Stück Fasern pro Konnektor
S0
S2
S3
S1M
S2M
S3M
S50M
500
150
50
300
130
40
8