Conforme/According to/Conforme/Gemäß:
ISO 13006 G - EN 14411 G (Gruppo/Group BIa)
CARATTERISTICHE TECNICHE
TECHNICAL FEATURES
CARACTÉRISTIQUES TECHNIQUES
TECHNISCHE EIGENSCHAFTEN
METODO DI PROVA
TEST METHOD
MÉTHODE D’ESSAI
PRÜFMETHODE
REQUISITI PRESCRITTI
REQUIRED VALUES
VALEUR REQUISE
VORGESCHRIEBENER WERT
ISO 13006 G - EN 14411 G
Gruppo/Group BIa
VALORI MEDI
AVERAGE VALUES
VALEURS MOYENNES
DURCHSCHNITTLICHE WERTE
UGL
Non smaltato
Unglazed
VALORI MEDI
AVERAGE VALUES
VALEURS MOYENNES
DURCHSCHNITTLICHE WERTE
GL
Smaltato
Glazed
ASSORBIMENTO D’ACQUA
WATER ABSORPTION
ABSORPTION D’EAU
WASSERAUFNAHMEFÄHIGKEIT
ISO 10545-3
≤ 0,5%
0,05%
0,05%
SFORZO DI ROTTURA (S)
BREAKING STRENGTH (S)
CHARGE DE RUPTURE (S)
BRUCHWIDERSTAND (S)
ISO 10545-4
≥ 1300 N
Conforme/
Compliant
13.600 N (20 mm)
Conforme/
Compliant
RESISTENZA ALLA FLESSIONE
MODULUS OF RUPTURE
RÉSISTANCE À LA FLEXION
BEIGEFESTIGKEIT
ISO 10545-4
≥ 35 N/mm2
50 N/mm2
50 N/mm2
CLASSE REQUISITI MECCANICI
MECHANICAL REQUIREMENTS CLASS
CLASSE EXIGENCES MÉCANIQUE
KLASSE DER MECHANISCHEN ANFORDERUNGEN
EN 1339
Requisito non previsto
No provision
Non prévu
Nicht erforderlich
T7-U7 (14 mm)**
U14 (20 mm)**
-
RESISTENZA ALL’ABRASIONE PROFONDA
DEEP ABRASION RESISTANCE
RÉSISTANCE À L’ABRASION PROFONDE
TIEFENABRIEBFESTIGKEIT
ISO 10545-6
≤ 175 mm3
123 mm3 (Blutech)
145 mm3
Conforme/Com-
pliant (Glossy)
-
DILATAZIONE TERMICA LINEARE
LINEAR THERMAL EXPANSION
DILATION THERMIQUE LINÉAIRE
THERMISCHE DILATATION
ISO 10545-8
Requisito non previsto
No provision
Non prévu
Nicht erforderlich
α ≤ 7x10-6 °C-1
α ≤ 7x10-6 °C-1
RESISTENZA AL CAVILLO
CRAZING RESISTANCE
HAARISSBESTÄNDIGKEIT
RÉSISTANCE AU TRESSILLAGE
ISO 10545-11
Nessuna alterazione
No alterations
Keine Änderung
Aucune altération
-
Resistente/
Resistant
RESISTENZA ALLE MACCHIE
STAIN RESISTANCE
RÉSISTANCE AUX TACHES
FLECKENBESTÄNDIGKEIT
ISO 10545-14
Classe 3 min
5 Resistente/
Resistant
≥ 3 (Levigata,
Perlata, Glossy,
Chalk, Lappata)
5
Resistente/
Resistant
RESISTENZA ATTACCO CHIMICO*
CHEMICAL RESISTANCE
RÉSISTANCE À L’ATTAQUE CHIMIQUE
CHEMIKALIENBESTÄNDIGKEIT
ISO 10545-13
Come indicato dal produttore
As indicated by manufacturer
Comme indiqué par le producteur
Wie wom hersteller angegeben
LA-HA Resistente/
Resistant
LB-HB (Blutech
Lappata, Perlata,
Levigata)
LA-HA
Resistente/
Resistant
CESSIONE DI PIOMBO E CADMIO
LEAD AND CADMIUM GIVEN OFF
ABGABE VON KADMIUM UND BLEI
DÉGAGEMENT DE CADMIUM ET PLOMB
ISO 10545-15
Requisito non previsto
No provision
Non prévu
Nicht erforderlich
-
Resistente/
Resistant
RESISTENZA AL GELO
FROST RESISTANCE
RÉSISTANCE AU GEL
FROSTBESTÄNDIGKEIT
ISO 10545-12
Nessuna alterazione
No alterations
Aucune altération
Keine änderung
Resistente/
Resistant
Resistente/
Resistant
REAZIONE AL FUOCO
FIRE REACTION
RÉACTION AU FEU
BRANDVERHALTEN
EN 13823
EN 9239-1
CPR (UE) 305/2011 - 2000/147/CE
UNI EN 13501-1
Classe/Class A1
(Wall)
Classe/Class A1fl
(Floor)
Classe/Class A1
(Wall)
Classe/Class A1fl
(Floor)
CONDUCIBILITÀ TERMICA
THERMAL CONDUCTIVITY
CONDUCTIVITÉ THERMIQUE
WÄRMELEITFÄHIGKEIT
EN 12524
-
λ = 1.3 W/m °k /
0.7 BTU/ft h °F
λ = 1.3 W/m °k /
0.7 BTU/ft h °F
CARATTERISTICHE DIMENSIONALI
DIMENSIONS
CARACTERISTIQUES DIMENSIONNELLES
SCITENMASSE
ISO 10545-2
Lunghezza e larghezza
Length and width
Longueur et largeur
Länge und breite
± 0,3% max ± 1mm (Rett/Rect)
± 0,6% max ± 2mm (Non rett/Not rect)
Conforme/
Compliant
Conforme/
Compliant
ISO 10545-2
Rettilineità spigoli
Straightness of sides
Rectitude des arêtes
Kantengeradheit
± 0,3% max ± 0,8mm (Rett/Rect)
± 0,5% max ± 1,5mm (Non rett/Not rect)
Conforme/
Compliant
Conforme/
Compliant
ISO 10545-2
Ortogonalità
Rectangularity
Orthogonalité
Rechtwinkligkeit
± 0,3% max ± 1,5mm (Rett/Rect)
± 0,5% max ± 2mm (Non rett/Not rect)
Conforme/
Compliant
Conforme/
Compliant
ISO 10545-2
Planarità
Flatness
Planéité
Ebenflächigkeit
± 0,4% max ± 1,8mm (Rett/Rect)
± 0,5% max ± 2mm (Non rett/Not rect)
Conforme/
Compliant
Conforme/
Compliant
ISO 10545-2
Spessore
Thickness
Épaisseur
Stärke
± 5% max ± 0,5mm
Conforme/
Compliant
Conforme/
Compliant
*Ad esclusione dell’acido fluoridrico e suoi derivati. / Excluding hydrofluoric acid and its derivatives. / Sauf l’acide fluorhydrique et ses derivés. /
Ausgenommen den fluorwasserstoff und seine derivate.
**Carrabile quando incollata su massetto. La classificazione si riferisce al solo formato quadrato, fino a 60x60 cm. / Can be driven on when glued on
screed. The classification only refers to the square format, up to 60x60 cm. / Carrossable s'il est collé sur une chape. La classification ne concerne que le
format carré, jusqu'à 60x60 cm. / Befahrbar bei Verkleben auf Estrich. Die Klassifikation bezieht sich nur auf das quadratische Format, bis zu 60x60 cm.
(AMERICAN STANDARDS)
According to: ANSI A 137.1 - Glazed and unglazed porcelain tiles (Class P1)
TECHNICAL FEATURES
TEST METHOD
REQUIRED VALUES
ANSI A 137.1
AVERAGE VALUES
UGL - Unglazed
AVERAGE VALUES
GL - Glazed
WATER ABSORPTION
ASTM C373
≤ 0,5%
0,05%
0,05%
BREAKING STRENGTH (S)
ASTM C648
≥ 250 lbf
Compliant
2800 lbf (20 mm)
Compliant
DEEP ABRASION
RESISTANCE
ASTM C1243
≤ 175 mm3
123 mm3 (Blutech)
145 mm3
Conforme/Compli-
ant (Glossy)
-
LINEAR THERMAL
EXPANSION
ASTM C372
No provision
α ≤ 4.4x10-6 °F-1 /
α ≤ 8x10-6 °C-1
α ≤ 4.4x10-6 °F-1 /
α ≤ 8x10-6 °C-1
CRAZING RESISTANCE
ASTM C424
No alterations
-
Resistant
STAIN RESISTANCE
ASTM C1378
As indicated by manufacturer
A Resistant
C (Levigata, Perlata,
Glossy, Chalk
lappata)
A Resistant
CHEMICAL RESISTANCE*
ASTM C650
As indicated by manufacturer
A Resistant
C (Blutech Lappata,
Perlata, Levigata)
A Resistant
LEAD AND CADMIUM
GIVEN OFF
ASTM C895
No provision
-
Resistant
FROST RESISTANCE
ASTM C1026
As indicated by manufacturer
Resistant
Resistant
FLAME SPREAD
ASTM E84
-
Class A
Class A
DIMENSIONS
ASTM C485
Edge
warpage
Rectified
± 0.4% or max ± 0.05
inch**
or ± 1.8 mm***
Calibrated
± 0.5% or
max ± 0.07 inch
Compliant
Compliant
ASTM C485
Diagonal
warpage
Rectified
± 0.40% or
max ± 0.07 inch
Calibrated
± 0.50% or
max ± 0.07 inch
Compliant
Compliant
ASTM C499
Nominal
dimensions
Rectified
- 3.0% / + 2.0%
of nominal dimensions
Calibrated
± 3.0% of nominal
dimensions
± 1.5%
± 1.5%
ASTM C499
CalIber
range
Rectified
± 0.25% or
max ± 0.03 inch
Calibrated
± 0.50% or
max ± 0.08 inch
Compliant
Compliant
ASTM C499
Thickness
≤ 0.040 inch
≤ 0.040 inch
≤ 0.030 inch
≤ 0.030 inch
ASTM C502
Wedging
Rectified
± 0.25% or
max ± 0.03 inch
Calibrated
± 0.50% or
max + 0.08 inch
Compliant
Compliant
* Excluding hydrofluoric acid and its derivatives
** Wichever is less, for tiles up to 24" (610 mm) on any side
***Applies to tiles larger than 24" (610 mm) on any side
CARATTERISTICHE TECNICHE: GRES PORCELLANATO
Technical features of porcelain stoneware
Caractéristiques techniques du grès cérame
Technische Eigenschaften des Feinsteinzeugs
210
211
