90
270
45
55
250
45
100
72
80
90
270
45
55
250
45
90
18
58
110
37
62
90
18
60
Accessories Part 1 · Part 2
Overvoltage protection
for single-phase end devices (on/off power supply unit)
CITEL overvoltage protection type 2 + 3
(in accordance with EN 61643-11) for the protection
of single-phase end devices (on/off power supply unit).
For DIN rail mounting
71 048 Overvoltage protection
Overvoltage protection
for three-phase end devices
CITEL overvoltage protection type 1 + 2 + 3
(in accordance with EN 61643-11) for the protection
of 3-phase end devices for application in TT and
TNS low voltage networks.
For DIN rail mounting
71 049 Overvoltage protection
Overvoltage protection
for single-phase end devices (on/off power supply unit)
CITEL overvoltage protection type 2 + 3
(in compliance with EN 61643-11) for the protection
of single-phase end devices (on/off power supply unit).
For installation in luminaires or connection boxes
71 045 Overvoltage protection
Inrush current limiter
Limits the starting current of electronic ballasts and LED drivers
to 33.9 A for 300 ms, an acceptable value for circuit protection.
For DIN rail mounting
71 039 Inrush current limiter
Overvoltage protection of LED luminaires
with 1–10 V or DALI interfaces
CITEL overvoltage protection type 2 + 3
(in accordance with EN 61643-11) for the protection
of LED luminaires with 1–10 V or DALI interface.
Protection class IP 65 · Safety class I
For installation in luminaire poles, bollards and suspended
ceilings, as well as for all types of installation outside
of luminaires or luminaire groups.
Housing made of glass fibre reinforced synthetic material
71 047 Overvoltage protection
Overvoltage protection
for single-phase end devices (on/off power supply unit)
CITEL overvoltage protection type 2 + 3
(in accordance with EN 61643-11) for the protection
of single-phase end devices (on/off power supply unit).
Protection class IP 65 · Safety class I
For installation in luminaire poles, bollards and suspended
ceilings, as well as for all types of installation outside
of luminaires or luminaire groups.
Housing made of glass fibre reinforced synthetic material
71 046 Overvoltage protection
BEGA overvoltage protection and inrush current limiter
Overvoltage poses a high risk for LED luminaires.
Overvoltage damage can include, for example, partial or complete failure of the LED modules, loss of brightness or
failure of the electronic components.
Overvoltage events have a negative impact on the service life of an LED luminaire, even if it remains operational.
We recommend the use of surge protection components and inrush current limiters for various use cases to protect
your LED lighting system.
• New in the range
Electronic load relay
Electronic load relay with make contact for spark-free
and bounce-free switching of single-pole sustained
loads up to 1 kW.
Through specific switching in the voltage zero
crossing, inrush currents are reduced
and less wear is generated on downstream
components.
• 71 320 Electronic load relay
421
