240
105
68
92
38
67
Ø 50
35
120
70
25
92
38
67
Accessories Part 2
DALI programmer
DALI programmer for the parametrisation of DALI operating devices.
Four buttons can be programmed with DALI parameters.
The configuration is performed using the free BEGA Tool app.
71 153 DALI programmer
DALI repeater
A one-off extension of the DALI line from 300 m to 600 m can be achieved using
the DALI repeater. The repeater electrically isolates the bus devices (DS = DALI-SELV).
For max. 64 bus devices on the entire DALI line.
71 038 A separate 24 V DC power supply unit is required for the power supply.
71 063 Cast aluminium housing · Protection class IP 65 · Safety class I
Integrated power supply 24 V DC
71 038 For DIN rail mounting
71 063 in IP 65 housing
Bluetooth DALI Gateway
For the commissioning and power supply of DALI operating devices and
control components in a DALI line with max. 64 operating devices.
The configuration is performed using the free BEGA Tool app.
71 075 For DIN rail mounting
71 151 For installation in device boxes
71 075
71 151
71 038
71 063
For planning and installation, please refer to the technical planning data.
This is permanently available in the instructions for use and data sheets on our website.
BEGA Tool App
The BEGA Bluetooth DALI Gateway enables wireless configuration of your DALI line using the free BEGA Tool app.
Luminaires, pushbuttons and sensors can be operated, addressed and configured using the app.
The definition of groups, scenarios, dimming values and other parameters is carried out conveniently by smartphone.
The combination of power supply and Bluetooth in a single gateway eliminates the need for an additional interface module,
and the system can be modified later at any time. BEGA Tool can also be used to configure the DALI programmer, which is
able to rapidly set luminaires to pre-defined settings for example.
More information can be found at bega.com/tool
413
