The quality of our LED technology
From our decades of experience, we know the high demands on quality which our luminaires are expected to meet.
This knowledge results in the continuous improvement of our products. This commitment to a high level of quality applies similarly
to our LED technology. In the processing and selection of our LED components, we rigorously follow our own ideas and do not
let ourselves be misled by other criteria commonly found on the market. To meet these goals, we have created all the necessary
conditions, including the best production processes.
All BEGA luminaires are fitted with modules adapted exactly to them, produced on our own premises. We have control over all
the materials used and therefore are not forced to enter any compromises. We alone are responsible for defining factors such
as a luminaires light output, light colour and thermo-management, thus making a direct impact on the quality of our luminaires.
Our LED modules are expected to reach the maximum possible service life. With this in mind, we are committed to using
components of the highest quality, made exclusively of ageing-resistant materials.
For example, we do not use any plastic lenses in our optical systems as their ageing resistance is doubtful.
Instead we prefer durable materials such as glass, silicone and aluminium.
Service life of the modules
The ageing of electronic components, and particularly LED, depends on the temperatures to which they are exposed during
operation. The higher the component temperature, the shorter the anticipated service life.
In the development of our luminaires, therefore, thermo-management represents a great challenge. In addition to using
high-grade components, we have also made design-related changes which contribute to favourable temperature conditions inside
the luminaires. This results in a significant extension of LED service life.
At the same time, electronic protective devices help to prevent the individual components from overheating.
We have taken a decidedly conservative approach to temperature control in our luminaires values remain far below the maximum
temperatures for LED modules.
Our LED modules are designed for a service life of at least 50 000 operating hours. Depending on the ambient temperature,
however, these values may be significantly higher. On our website you will find data sheets for each luminaire with information
on the LED service life in relation to the relevant colour temperature and ambient temperature.
Replacement
What happens when an LED comes to the end of its service life? Where can you obtain a replacement for this electronic
component?
Unlike conventional lamps, for which there are clearly defined connection standards, LED are an integrative part of luminaires.
It is difficult therefore for non-specialists to obtain matching LED replacement modules.
As a responsible manufacturer, we have come up with a solution to this problem for our customers. Today you will already
find a lamp designation in every LED luminaire, providing exact details of the installed modules.
Furthermore, our in-house production will enable us to deliver matching LED modules for many years to come.
We guarantee the availability of replacement modules even 20 years after you purchase an LED luminaire from us.
Perhaps the technology and design of the components will have changed by then, but in their light colour and output,
the replacements will definitely match the originally installed LED modules.
Our LED luminaires are designed to enable these components to be replaced easily on site using standard tools. Suitable
precautions have already been taken to protect against electrostatic discharge and accidental polarity reversal of the electronic
components. The safe and economical further use of your LED luminaires is thus assured.
Our LED technology
564
Kat33_BG47_48_553-576_GB_FR.indd
564
28.04.17
10:42
