5
20
2 1 0,5 0,2
lx
m
1
2
3
4
5
1
1
0
2
2
24202
LED
H = 0,5 m
15 3 1 0,5 0,2
lx
m
2
4
6
8
10
2
0
2
4
4
24203
LED
H = 1,0 m
2
5
20
1 0,5
0,2lx
m
1
2
3
4
5
0
1
2
1
2
24206
LED
H = 0,5 m
5
20
2 1 0,5 0,2
lx
m
2
4
6
8
10
2
2
0
4
4
24204
LED
H = 1,0 m
2 1
5
20
0,5 0,2
lx
m
2
4
6
8
10
2
0
2
4
4
24207
LED
H = 1,0 m
2
5
20
1 0,5
0,2lx
m
2
4
6
8
10
0
2
4
2
4
24208
LED
H = 1,0 m
For decades, BEGA luminaires with this design have been outstanding lighting
construction details on numerous structures worldwide. As their successors, these
new luminaires have been adapted to todays installation situations and to our LED
technology. The slim yet screwless luminaire frames of this new series are design-
defining. The extremely low maintenance requirements of our LED technology enable a
new product concept with far easier and quicker installation. The electrical connection
is now comfortably made before installation in the structure. The installed luminaire is
then secured with the BEGA mounting system in the structure, e.g. in drywalls or in an
installation housing.
You can choose between two installation housings and two plaster frames for the
various installation situations. The luminaires can be surface-mounted as usual or they
can be flush-mounted in plastered walls. For installation in EWIS external wall insulation
systems pleaseuse a Type B installation housing in combination with a Type C or Type
D plaster frame. At the planning stage, please consult the instructions for use issued
for installation housings and installation frames. For the technical data of installation
housings and plaster frames, see Page 561.
The installation dimensions of these new luminaires are identical to those of the previous
luminaires. Two groups of luminaires for illuminating corridors, pathways and staircases
both indoors and out. The shielded luminaires direct the light downwards, and are fully
shielded above the horizontal. The highest degree of illuminance is achieved in the
immediate vicinity of the luminaire. Luminaires with a high level of visual comfort for the
uniform illumination of footpaths and surfaces with maximum glare suppression.
These luminaires with asymmetrical flat beam light distribution emit their light into the
width of the room. The light is directed downwards and shielded above the light
emission level. For the wide beam and uniform illumination of surfaces and paths.
Protection class IP 65 · Cast aluminium, aluminium and stainless steel
Reflector made of pure anodised aluminium · Safety glass
These are luminaires which will impress you through the choice of colour temperature,
a minimum LED service life of 50 000 hours and 20 years availability guarantee for the
LED modules.
LED colour temperature: 3000 K article number or 4000 K article number + K4
The luminaire luminous flux and the luminaire connected wattage quoted in the table
might change as a result of technical progress. On our website you will find data sheets
with information on each luminaire concerning not only the current values but also the
LED service life and the luminous flux in relation to the respective colour temperature.
Luminaire colour graphite or silver
Graphite article number ·
Silver article number + A
LED recessed wall luminaires for flush or surface mounting
Shielded or asymmetrical flat beam light
44
Kat33_BG03_04_025-048_GB_FR.indd
44
02.05.17
15:11