Compact in-ground luminaires with small dimensions for illuminating ground surfaces
both indoors and out. Optionally available with one, two or four light sectors for different
lighting situations.
Before the luminaires are installed, the customer must lay a foundation that will absorb
the pressure load of the luminaires.
The luminaires can be driven over by vehicles with pneumatic tyres. The luminaires
must not be used in areas where they are exposed to horizontal loads caused by
braking, accelerating and changes of direction.
You can find luminaires for this type of lighting with larger dimensions on Page 244.
A maximum 30 °C is reached as the operating temperature T in the centre of the glass
surface (measured in accordance with EN 60598 at ambient temperature ta 15 °C).
Protection class IP 67 · Safety class I · Luminaire cover made of cast aluminium
Luminaire housing made of cast stainless steel and stainless steel · Silicate glass
1.8 m connecting cable with water stop
If through-wiring to a further luminaire is required, we recommend using distribution
box 70730. For the technical data of the distribution box, see Page 546.
On request, the luminaires are available in the light colours green, blue, amber and red.
These are luminaires which will impress you through the choice of colour temperature,
a minimum LED service life of 50 000 hours and 20 years availability guarantee for the
LED modules.
LED colour temperature: 3000 K article number or 4000 K article number + K4
The luminaire luminous flux and the luminaire connected wattage quoted in the table
might change as a result of technical progress. On our website you will find data sheets
with information on each luminaire concerning not only the current values but also the
LED service life and the luminous flux in relation to the respective colour temperature.
Luminaire colour graphite
Drive-over LED in-ground luminaires
With small dimensions for illuminating ground surfaces
242
Kat33_BG21_22_241-264_GB_FR.indd
242
27.03.17
09:12
