¯E
lx
77007
LED
m
80
160
240
320
400
7
5
3
1
9
4
2
0
2
4
¯E
lx
77040
LED
m
300
600
900 1200 1500
7
5
3
1
9
4
2
0
2
4
¯E
lx
77006
LED
77005
LED x 0,35
m
100
200
300
400
500
4
3
2
1
2
1
0
1
2
¯E
lx
77105
LED
m
20
40
60
80
100
2
3
4
1
2
1
0
1
2
Ι max. bei γ 25°
¯E
lx
77106
LED
m
60
120
180
240
300
2
3
4
1
2
1
0
1
2
Ι max. bei γ 25°
¯E
lx
77107
LED
m
40
80
120
160
200
3
5
7
9
1
4
2
0
2
4
Ι max. bei γ 23°
¯E
lx
77116
LED
m
100
200
300
400
500
3
5
7
9
1
4
2
0
2
4
Ι max. bei γ 25°
¯E
lx
77145
LED
m
40
80
120
160
200
4
3
2
1
2
1
0
1
2
¯E
lx
77146
LED
m
60
120
180
240
300
7
5
3
1
9
4
2
0
2
4
¯E
lx
77147
LED
m
100
200
300
400
500
7
5
3
1
9
4
2
0
2
4
¯E
lx
77148
LED
m
80
160
240
320
400
14
10
6
2
18
8
4
0
4
8
¯E
lx
84115
LED
m
160
320
480
640
800
14
10
6
2
18
8
4
0
4
8
Drive-over LED in-ground luminaires
For installation in ground surfaces
Location luminaires or floodlights
An extensive and efficient series of LED in-ground luminaires for use both indoors and out. A large number of
different light outputs as location luminaires, symmetrical, asymmetrical and adjustable floodlights are available
for planning work. The entire luminaire housings are made of stainless steel. Depending on the installation
situation, the luminaires can be installed using installation housings, or simply floating, for example in gravel,
lawn surfaces, flowerbeds or in paved surfaces. In the tables you will find matching stainless steel installation
housings as well as lighting accessories.
If the luminaires are to be used with an installation housing, a foundation with drainage must be provided by the
customer. The luminaires can be driven over by vehicles with pneumatic tyres. The luminaires must not be used
in areas where they are exposed to horizontal loads caused by braking, accelerating and changes of direction.
A maximum 40 °C is reached as the operating temperature T in the centre of the glass surface (measured in
accordance with EN 60598 at ambient temperature ta 15 °C).
When the glass is wet, there may be a risk of slipping. For walkable public areas, we recommend skid-blocking
glass in accordance with DIN 51130 R 13. With the additional specification R after the article number, we can
supply all luminaires with skid-blocking glass. This increases the dispersion of the light distribution.
Trim ring and luminaire housing made of stainless steel · Safety glass
Floodlights with reflectors made of pure anodised aluminium · 1.8 m connecting cable with water stop
Floodlights with symmetrical light distribution have an integral louvre for lateral glare suppression.
Accessories for adjustable floodlights:
Installation housings
Diffuser disks, optionally wide beam or flat beam
The RGB W luminaires can be controlled by DALI colour light control (DT 8, RGBWAF, xy). We recommend our
BEGA Control system for this purpose. For the technical data of DALI system components, see Pages 556 to 559.
On this double page, you can find suitable installation housings for the in-ground luminaires in the table.
For the technical data of installation housings, see Page 560.
On request, the luminaires are available in the light colours green, blue, amber and red.
These are luminaires which will impress you through the choice of colour temperature, a minimum LED service
life of 50 000 hours and 20 years availability guarantee for the LED modules.
LED colour temperature: 4000 K article number or 3000 K article number + K3
The luminaire luminous flux and the luminaire connected wattage quoted in the table might change as a result
of technical progress. On our website you will find data sheets with information on each luminaire concerning
not only the current values but also the LED service life and the luminous flux in relation to the respective colour
temperature.
220
Kat33_BG19_20_217-240_GB_FR.indd
220
14.03.17
13:02
