¯E
lx
77912
LED
m
60
120
180
240
300
4
3
2
1
2
1
0
1
2
¯E
lx
77913
LED
m
60
120
180
240
300
7
9
5
3
1
4
2
0
2
4
¯E
lx
77914
LED
m
80
160
240
320
400
7
5
3
1
9
4
2
0
2
4
lx
77066
LED
m
60
120
180
240
300
4
3
2
1
2
1
0
1
2
¯E
¯E
lx
77125
LED
m
60
120
180
240
300
7
5
3
1
9
4
2
0
2
4
¯E
lx
77129
LED
m
100
200
300
400
500
7
5
3
1
9
4
2
0
2
4
¯E
lx
77130
LED
m
80
160
240
320
400
14
10
6
2
18
8
4
0
4
8
¯E
lx
84114
LED
m
160
320
480
640
800
14
10
6
2
18
8
4
0
4
8
This is an extensive and efficient series specially for mounting in ground surfaces with holes drilled
by the customer, both indoors and out. Location luminaires, symmetrical floodlights and adjustable
floodlights are available for your planning work. The entire luminaire housings are made of stainless
steel. Luminaires with this design are suitable for installation in core-drilled holes or ground cutouts
in floor sections. The BEGA mounting system allows fast, secure and accurately positioned installation
of the luminaires. The luminaires can be driven over by vehicles with pneumatic tyres. The luminaires
must not be used in areas where they are exposed to horizontal loads caused by braking, accelerating
and changes of direction. A maximum 40 °C is reached as the operating temperature T in the centre of
the glass surface (measured in accordance with EN 60598 at ambient temperature ta 15 °C).
When the glass is wet, there may be a risk of slipping. For walkable public areas, we recommend skid-
blocking glass in accordance with DIN 51130 R13. With the additional specification R after the article
number, we can supply all luminaires with skid-blocking glass. This increases the dispersion of the light
distribution.
Trim ring and luminaire housing made of stainless steel · Safety glass
Floodlights with reflectors made of pure anodised aluminium · 1.8m connecting cable with water stop
Floodlights with symmetrical light distribution have an integral louvre for lateral glare suppression.
Accessories for adjustable floodlights:
Diffuser disks, wide beam or flat beam
The RGB W luminaires can be controlled by DALI colour light control (DT 8, RGBWAF, xy).
We recommend our BEGA Control system for this purpose. For the technical data of DALI system
components, see Pages 556 to 559.
On request, the luminaires are available in the light colours green, blue, amber and red.
These are luminaires which will impress you through the choice of colour temperature, a minimum
LED service life of 50 000 hours and 20 years availability guarantee for the LED modules.
LED colour temperature: 4000 K article number or 3000 K article number + K3
The luminaire luminous flux and the luminaire connected wattage quoted in the table might change
as a result of technical progress. On our website you will find data sheets with information on each
luminaire concerning not only the current values but also the LED service life and the luminous flux in
relation to the respective colour temperature.
Drive-over LED in-ground luminaires
For installation in round cutouts
Location luminaires or floodlights
218
Kat33_BG19_20_217-240_GB_FR.indd
218
14.03.17
13:02
