SPECIFICATIONS
STANDARD COLOURS
00
PURE WHITE
RAL 9016
01
BLACK
RAL 9005
10
WHITE
RAL 9010
24
BRONZE
25
RUST
30
ANTHRACITE
35
SLATE
GREY
40
GREY
RAL 9006
DIMENSIONS
COD.
Source
Flux
Fixture
Flux
CCT
CRI
Power
CL
9850W/WR4.VS
2080 lm
450 lm
3000 K
80
17W - 220-240Vac 50/60Hz
I
9850W/NR4.VS
2180 lm
480 lm
4000 K
80
17W - 220-240Vac 50/60Hz
I
LED SYSTEM WITH BUILT-IN DRIVER - Single Emission
COD.
Source
Flux
Fixture
Flux
CCT
CRI
Power
CL
9851W/WR4.VS
2080 lm
900 lm
3000 K
80
17W - 220-240Vac 50/60Hz
I
9851W/NR4.VS
2180 lm
960 lm
4000 K
80
17W - 220-240Vac 50/60Hz
I
LED SYSTEM WITH BUILT-IN DRIVER - Double Emission
CL I
• The rated flux values refer to source LED at
Ts85°C / ta25°C
• The Power/Flux in the table refer to maximum
installable value
• Lower powers are available on request, only
for version with built-in driver
• Dimmable version not available
MATERIALS
• Fixture/Base in Die-Cast Aluminium Alloy
• Borosilicate glass with internal acid-etched finish with transmission LT>60%.
• Glass gasket in neutral cross-linking silicone glue - Tx-50/+250°C UV resist.
• Integrated passive heat sink • Internal and external screws in A2 Stainless Steel
• IP65 Megol resin cable gland UV-Resist. GWT850°C
• Polyester powder coating, UV-stabilised with anti-corrosion treatment.
CHARACTERISTICS
• Optical compartment accessible during installation, with wall-mounting plate.
• Mounting system body/plate obtained through hidden locking grain.
• Lateral power cable input. Internal 3-ways terminal block for non feed-through wiring.
• Power cable allowed up to 1.5mm² with external sheath max. 10mm.
• Luminaire Conforms to EN60598-1 Standard and special requirements
Installation:
Wall
270
120
45
Beam
>110°
Single Diffuse Emission
Frosted Glass
Not dimmable
Beam
>110°
Double Diffuse Emission
Frosted Glass
Not dimmable
84
227
45
ASSEMBLY
41
WALL
ISOTTA
