design
Klaus Begasse
2013
Reeds
Floor light fixture with diffuse emission, with mono-
chromatic LED light sources.
Available with IP20 protection degree for indoors,
IP67 and IP68 for outdoors.
Light is diffused through 7 PMMA rods with
different heights to give the impression of a groove
of reeds and which can be screwed to the base by
means of AISI 316 stainless steel bushes. Part of the
light is also diffused on the floor around the base.
The base has an irregular shape, which has been
designed to allow a «mosaic» connection with other
light fixtures so as to create an elaborate composition
as needed.
IP67 and IP68 versions are available in Single or
Triple shape.
Reeds IP20
Consists of a base made up of a transparent poly-
carbonate casing
Installed between 2 aluminium plates and anti-scratch
support feet.
Technopolymer aesthetic cover.
Complete with integrated ballast and plug with
transparent cable. Switching on and off are performed
by means of the pedal push button located on the cable.
Technical features in compliance with EN60598-1
Insulation class II.
Reeds IP67
Consists of a base made up of a transparent
polycarbonate casing installed between 2 AISI316
stainless steel plates fixed by means of AISI316
stainless steel screws. Water sealing is assured by a
silicone gasket. The light fixture can be fastened to
the floor by means of the holes in the lower plate.
Technopolymer aesthetic cover.
Complete with integrated ballast and supplied with
a 1.5 m-long H05RN-F 2x1 cable provided with IP67
connector for the electrical connection to the mains
suitable for 5-13.5mm diameter cables.
Technical features in compliance with EN60598-1
Insulation class II.
Reeds IP68
Consists of a base made up of a transparent poly-
carbonate casing installed between 2 AISI316 stainless
steel plates fixed by means of AISI316 stainless steel
screws. Water sealing is assured by a silicone gasket.
The light fixture can be fastened to the floor by means
of the holes in the lower plate.
Technopolymer aesthetic cover.
The light fixture is supplied with 24V DC power and is
provided with a 5 m-long H05RN-F 2x1 cable with
IP68 connector for the electrical connection to the
mains suitable for 5-13.5mm diameter cables.
Technical features in compliance with EN60598-1 and
section 2-18.
Insulation class III.
222
