design
Ernesto Gismondi
2013
Sostituto Spot
Light fixture with direct emission, with monochro-
matic LED light sources.
Floor, wall, eaves installation.
Consists of lighting unit, wiring terminal board and
fixing plate. Rotation on the base +/-10°, body
tilting +/-90. Positioning is maintained by means of
locking dowels.
EN AB47100 aluminium body and terminal board,
silicone gaskets. Electronic ballast integrated in the
body.
Polycarbonate diffuser silicone-sealed to the lens
supporting unit.
Composed by 3 interchangeable optical units.
IP67 connector for the electrical connection to the
mains, which can be located in the base compartment
and is suitable for 5-13.5mm diameter cables.
LED circuits with PMMA lenses in 3 beam versions:
10°, 23° and elliptical 12x40°
All the screws used outside the product are in
AISI 316 stainless steel.
All the components in die-cast aluminium are painted
with 3-stage outdoor treatment: nanotechnologies,
anti-oxidizing primer, polyester paint.
Technical features of the lighting fixtures in compli-
ance with EN60598-1 and section 2-5.
IP Rating IP66.
Protection level from 4KV impulse overvoltage.
Insulation class II.
162
