Antrhracite
Grey
10
Grey-white
Ral 9002
00
IP65
MacAdam 3SDCM
CRI =80
EL
163
106
229
Code
T4190NLW. 00/10
W
Weight
Beam
Flux
CCT
14 W
2 kg
AS
407 lm
3000K
For further information on Molla
visit artemide.com
Molla
Ernesto Gismondi
2011
M O L L A
Light fixture with 2 combined light beams:
the large one with lighting function and
the narrow one with decorative function.
Wall installation. The fixture can be
installed with the main beam pointed
either downwards or upwards according
to the kind of lighting desired (direct or
indirect).
The large beam is obtained by the
combination of a monochromatic LED
light source with a reflector. The narrow
beam is obtained by the combination of
a monochromatic LED light source with a
high-performance projector.
Available in two finishes: light grey and
anthracite grey painted.
Consists of lighting cap unit and terminal
board fixed together by means of locking
screws.
Cap and terminal board in die-cast
EN AB-47100 aluminium.
Watertight gasket in silicone rubber.
Electronic ballast integrated in the fixture.
Projector consists of a body in reinforced
polymer and PMMA lenses.
Tempered and silkscreened light-diffusing
glasses, siliconed flush with the lighting
cap.
Power connection to the mains to be
carried out outside the fixture, without
the need to open it, by means of a pre-
installed IP65 connection device suitable
for cables with a diameter between 6 and
13 mm.
Wall fixing by means of a bracket in
folded steel sheet to which the fixture is
fastened with two screws.
Locking screws used outside the fixture in
AISI 316 stainless steel.
Die-cast aluminium and bracket painted
with 3-stage outdoor treatment:
nanotechnologies, antioxidant primer,
polyester paint.
Technical features of light fixtures in
compliance with EN60598-1.
220/240Vac 50/60Hz electronic
ballast included
776
777
776
777
