For further information on Reeds
visit artemide.com
Reeds
Klaus Begasse
2013
Reeds IP20
Consists of a base made up of a transparent polycarbonate casing.
Installed between 2 aluminium plates and anti-scratch support feet.
Technopolymer aesthetic cover.
Complete with integrated ballast and plug with transparent cable. Switching on
and off are performed by means of the pedal push button located on the cable.
Reeds IP67
Consists of a base made up of a transparent polycarbonate casing installed
between 2 AISI316 stainless steel plates fixed by means of AISI316
stainless steel screws. Water sealing is assured by a silicone gasket. The light
fixture can be fastened to the floor by means of the holes in the lower plate.
Technopolymer aesthetic cover.
Complete with integrated ballast and supplied with a 1.5 m-long H05RN-F 2x1
cable provided with IP67 connector for the electrical connection to the mains
suitable for 5-13.5mm diameter cables.
Reeds IP68
Consists of a base made up of a transparent polycarbonate casing installed
between 2 AISI316 stainless steel plates fixed by means of AISI316 stainless
steel screws. Water sealing is assured by a silicone gasket. The light fixture
can be fastened to the floor by means of the holes in the lower plate.
Technopolymer aesthetic cover.
The light fixture is supplied with 24V DC power and is provided with a 5
m-long H05RN-F 2x1 cable with IP68 connector for the electrical connection
to the mains suitable for 5-13.5mm diameter cables.
Floor light fixture with diffuse emission,
with monochromatic LED light sources.
Available with IP20 protection rating for
indoors, IP67 and IP68 for outdoors. IP67
and IP68 versions are available in Single or
Triple shape.
Light is diffused through 7 PMMA
rods with different heights to give the
impression of a reed bed and which can be
screwed to the base by means of AISI 316
stainless steel bushes. Part of the light is
also diffused on the floor around the base.
The base has an irregular shape, which
has been designed to allow a «mosaic»
connection with other light fixtures so as to
create an elaborate composition as needed.
Technical features in compliance with
EN60598-1 (IP20, IP67) and section 2-18
(IP68).
712
713