Light fixture with 1, 2 or 4 light beams using
monochromatic LED light sources together with
light-diffusing lenses which optimize the optical
performance of the beams and establish their width.
Designed to create geometric lights of scenic effect,
it is available with beams of the same spread
or with combined beams.
Beam spread 15° and 90°.
Wall installation.
Available in two shapes: square and round and in
two finishes: grey-white painted and rust painted.
Composed by lighting cap unit and terminal
board fixed together by means of locking dowels.
Cap in die-cast EN AB-47100 aluminium.
Terminal board in reinforced polymer.
Watertight gasket in silicone rubber.
Electronic ballast integrated in the fixture.
PMMA lenses siliconed flush with the cap
to obtain two different beam angle opening
(narrow and wide).
White monochromatic LEDs available
in 3 colour temperatures:
Warm = 3000K
Neutral = 4000K
Wiring to be carried out inside the terminal board
by piercing an IP65 membrane grommet suitable
for cables with a diameter of 6-13 mm.
Locking dowels used outside the fixture
in AISI 316 stainless steel.
Painted die-cast aluminium with 3-stage outdoor
treatment: nanotechnologies, antioxidant primer,
polyester paint.
Technical features of light fixtures in compliance
with EN60598-1.
IP Rating IP65.
ENEC approved.
Insulation class II.
766 _ 767
