• Outdoor luminaire for: installation on wall, bracket or on pole (Perseo 4, Perseo 9) / installation on wall or on pole (Perseo 16, Perseo 30).
• Configuration: die-cast aluminium structure. EN AB-47100 alloy (low copper content)
• Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with
a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Tempered extra-clear glass diffuser, mechanically glued to the structure, silicone gaskets.
• The luminaire is equipped with a graduated stainless steel fixing plate allowing a precise installation on the wall.
• Protection Rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: I
Perseo 4
• Installation: wiring through an M10x1,5 metal cable gland. The luminaire is equipped with 700mm two-pole cable. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland.
• The wall bracket/pole is equipped with a 2 way terminal block 3-conductor cables - IP68
Perseo 9
• Installation: wiring through an M12x1,5 metal cable gland. The luminaire is
equipped with a piece of three-pole cable for an easy to make connection. Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland.
• The wall bracket/pole is equipped with a 2 way terminal block 3-conductor cables - IP68
Perseo 16
• Installation: wiring through an M16x1,5 metal cable gland (4,5<ø<10mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. The pole version has to be installed using a dedicated bracket to be ordered separately.
Perseo 30
• Installation: wiring through an M20x1,5 metal cable gland (7<ø<13mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. The pole version has to be installed using a dedicated bracket to be ordered separately.
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Italy