• Outdoor luminaire for surface installation on wall
• Configuration: polycarbonate structure and die-cast aluminium cover, die-cast aluminium base (Melrie Maxi) EN AB-47100 alloy (low copper content).
• Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion
treatment is done to protect against rusting.
• Expanded silicone gaskets.
• Protection Rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: Melrie II; MaxiMelrie I
• Installation: Melrie wiring through two rubber cable holders (5<ø<10mm cables); Melrie Maxi wiring through two rubber cable holders (8<ø<13mm cables). Outdoor use requires suitable flexible cables assuring the watertightness of cable holders. Installation through two dedicated fixing holes external to the sealed unit.
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Designer: Gigetto
Italy