• Square luminaire for outdoor installation on wall.
• Configuration: die-cast aluminium structure. EN AB-47100 alloy (low
copper content).
• Double layer coating for high resistance to corrosion: The low copper
Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Tempered glass with silkscreen border. The diffuser is fixed to the aluminium structure through a robotic gluing system. AISI 304 stainless steel fixing plate.
• Protection Rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: II
• Installation: wiring through two EPDM rubber cable glands (5<ø<9mm
cables). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland (we recommend neoprene cables H05 RN-F). Installation on wall requires the dedicated fixing base supplied with the luminaire.
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Italy
